885 & 995 loaders

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
dbiow
Posts: 70
Joined: Sat Apr 30, 2016 4:20 pm
Location: Isle of Wight

885 & 995 loaders

Post by dbiow » Sun Aug 11, 2019 11:22 am

Hello folks, I’ve not been here for a while.
I have got a 79 885 with a LQ8 trip loader on and a LF9 power loader from a 1972 995 sat in the shed.

I’m wanting to convert my trip loader to a power loader so I can use a bale spike and tines (not built yet)

Is there any reason I can’t put the 995 loader on to the 885 as they are the same width or will I run into problems with the geometry and therefore be better converting the trip loader to a power one.

I do have the complete LF9 loader from the 995 so can swop parts as needed or would be happy to trade with someone who wants the LF9 loader for a similar set up for a q cab 885

Thanks for any thoughts Will.
885 q cab and 25d on the Isle of Wight.

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests