Cropmaster Tools

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER - Please be aware that any views expressed or advice given on the Forum are purely the opinion of the relevant poster. The David Brown Tractor Club Ltd does not endorse any of the views expressed, or advice thus given. Forum Visitors should be aware that any action they may take as a result of such information is taken at their own risk.

Any user inactive for more than 3 months will automatically be deactivated, please contact if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email giving your username.

Amended 19/09/18

Moderators: Segrie61, admin

Post Reply
User avatar
Posts: 37
Joined: Wed Aug 13, 2014 8:25 am
Location: Ceredigion

Cropmaster Tools

Post by tractorfan » Sun Jul 08, 2018 11:23 pm

Were new Cropmasters equipped with tools?

If so what were they?


User avatar
Posts: 1863
Joined: Fri Feb 24, 2012 10:01 pm
Location: Monmouthshire

Re: Cropmaster Tools

Post by db2d » Tue Jul 10, 2018 7:42 am

There was a tool kit for the Cropmaster. It consisted of a number of openended spanners,screwdriver,box spanner and tommy bar for the spark plugs,wheel brace, square key for oil plugs and a grease gun.There may have been a few other items.

User avatar
Posts: 268
Joined: Tue Jan 27, 2009 8:25 am
Location: New Zealand

Re: Cropmaster Tools

Post by GeoffDEAL » Fri Jul 13, 2018 10:43 pm

Hi in the DB 25 parts book - tool bag and tools it has starting handle,tool bag,pliers,screw driver,spanner1/4-3/16, spanner 3/8-7/16 spanner 5/8-3/4 spanner oB.A-2B.A , box spanner 5/16-3/8 BSF,box spanner 1/2 BSF , wheel brace , wrench drain plug , grease gun , tommey bar small , tommey bar large ,box spanner spark plug ,gap gauge, feeler gauge magneto, so was a very comprehensive kit even on the DB25 and would have been similar to the Cropmaster one if putting together a correct tool kit .

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests