885 hydraulic quick couplings BSP size?

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Zwap
Posts: 4
Joined: Fri May 18, 2018 1:22 pm
Location: Sweden

885 hydraulic quick couplings BSP size?

Post by Zwap » Sun Jul 08, 2018 7:40 am

Got a leaking hydralic quick coupling on my 1975 885 and wonder what BSP size i should look for to replace the quick coupling?
hydralic.JPG
hydralic.JPG (44.55 KiB) Viewed 355 times

User avatar
ollek
Posts: 3533
Joined: Tue Apr 10, 2012 1:20 pm
Location: South West Finland

Re: 885 hydraulic quick couplings BSP size?

Post by ollek » Sun Jul 08, 2018 11:32 am

1/2 inch BSP, as shown in the following link showing a page from the parts catalogue https://partstore.caseih.com/us/parts-s ... 7ar1292259 Your tractor was manufactured during a time when 90 present of all tractors used a 1/2 inch BSP quick coupler. The 1/2 inch male coupler is still the most used on implements in my country.

Zwap
Posts: 4
Joined: Fri May 18, 2018 1:22 pm
Location: Sweden

Re: 885 hydraulic quick couplings BSP size?

Post by Zwap » Sun Jul 08, 2018 2:51 pm

Perfect, thanks!!!

Scooby
Posts: 3870
Joined: Tue Jan 03, 2006 8:16 pm
Location: Warwickshire

Re: 885 hydraulic quick couplings BSP size?

Post by Scooby » Sun Jul 08, 2018 5:46 pm

And please get some bungs to go in the unions to keep the crap out of the Selectamatic system.
ImageImage


Three is twee, four does snore, but 6 just clicks........Scooby

Post Reply

Who is online

Users browsing this forum: jazo and 20 guests