1412 hydro

This is for Members to post their photos. Ideally DB but also Member's photos of working with tractors etc. Inappropriate photos will be deleted and the Member posting them may be banned from this Forum.

Moderators: Segrie61, admin

Post Reply
User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

1412 hydro

Post by scotty » Wed Jun 12, 2013 9:30 pm

2 owners from new, 4456 hours. last farm for 23 years
Attachments
20130603_200518.jpg
20130603_200518.jpg (113.3 KiB) Viewed 10468 times
20130603_200529.jpg
20130603_200529.jpg (96.06 KiB) Viewed 10259 times
20130603_200509.jpg
20130603_200509.jpg (79.92 KiB) Viewed 10259 times
Last edited by scotty on Thu Jun 13, 2013 9:25 pm, edited 1 time in total.

User avatar
tomwill
Posts: 483
Joined: Fri Jul 23, 2010 8:33 pm
Location: Australia.

RE: 1412 hydro

Post by tomwill » Wed Jun 12, 2013 11:41 pm

Scotty, Great looking 1412 there i have one [see traction] that cab never came to Australia i would certainly like to have that one in my fleet.Cheers Tom Williams DBTC AUST

User avatar
Steve1210
Posts: 16
Joined: Fri May 03, 2013 9:42 pm
Location: Yorkshire

Post by Steve1210 » Thu Jun 13, 2013 10:20 pm

Scotty, a bit of a surprise when I saw your tractor reg number. My 1412 was the next one along, must have been side by side in the same dealership. Do you know any more of it's history?
Attachments
A14.jpg
A14.jpg (60.17 KiB) Viewed 10254 times

User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

Post by scotty » Fri Jun 14, 2013 9:59 pm

hi it came from David brown dealership at wiggingtonjust outside York.went to a farm terrington

then to a farm at crake for 26years.

User avatar
Steve1210
Posts: 16
Joined: Fri May 03, 2013 9:42 pm
Location: Yorkshire

Post by Steve1210 » Fri Jun 14, 2013 10:41 pm

Yes, well I remember on my nose cone you could faintly make out a sticker saying David Brown Retail, Wiggington, York. I don't know where mine began its working life but from the late 80's till around 1996 it belonged a demolition and excavation firm in Hull where it was solely used for cleaning the road outside the yard with a pto driven rotary brush, not hard work but I suspect it didn't receive a lot of love and attention. A friend of mine bought it from them to use on his small holding till 2008 when I got it to gradually tidy up and eventually restore.

User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

Post by scotty » Sat Jun 15, 2013 9:53 pm

HI Steve,the last owner was 83,and used to plough with a 3 ferrow reversible,back end of last year,there is another one some where,with reg number one up or down to owers
the first owner a mr drury had 2 from new,
we are going to restore the 1412 soon full respray ect,to go along with the 1410.
will try to find out more,
Attachments
20130605_200427.jpg
20130605_200427.jpg (110.41 KiB) Viewed 10101 times

User avatar
Steve1210
Posts: 16
Joined: Fri May 03, 2013 9:42 pm
Location: Yorkshire

Post by Steve1210 » Sat Jun 15, 2013 11:10 pm

Hi Scotty,your 1412 looks in much nicer original condition than mine. The one I have seems to have been destined to be exported to Denmark originally as all the stickers inside the cab are in Danish but with English stickers still there underneath. Does yours have the big David Brown decal across the top of the back of the cab as in the 90 series?

User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

Post by scotty » Sun Jun 16, 2013 5:59 pm

hi Steve. the 1412 has German stickers all in side cab
i. am away for the week but Will be in touch when i get back

User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

Post by scotty » Sun Aug 04, 2013 8:46 pm

Hi Steve,1412 had a slight problem,crank shaft oil seal had to split it,all done now
fit new clutch at same time,it has just been bailing last week running ok

User avatar
Steve1210
Posts: 16
Joined: Fri May 03, 2013 9:42 pm
Location: Yorkshire

Post by Steve1210 » Sun Aug 04, 2013 10:14 pm

Hi Scotty, mine too needed a rear crankshaft oil seal when I first bought it, clutch was okay though when we took it out. Here's a pic of when we split it. Steve.
Attachments
A15.jpg
A15.jpg (58.99 KiB) Viewed 9563 times

User avatar
scotty
Posts: 59
Joined: Fri Sep 11, 2009 9:24 pm
Location: Thirsk northyorkshire

hydro

Post by scotty » Mon Aug 05, 2013 9:13 pm

had a bit of trouble getting back together but a good friend
a ex DB mechanic soon had it sorted
Attachments
20130707_164559.jpg
20130707_164559.jpg (68.79 KiB) Viewed 9520 times

User avatar
jeremyb
Posts: 2
Joined: Thu Dec 10, 2015 4:15 pm
Location: Exeter UK

Post by jeremyb » Thu Dec 10, 2015 4:59 pm

Hello, please see thread " our farm sale in 1993" in this photo section. These two 1412's are pictured on their original farm at Terrington. I worked on them when they were new when I was at DB Wigginton branch who supplied them. . They are both German spec'.

JeremyB

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests