990 hydraulics

This is for members to post photos of their restorations, either completed or "works in progress"

Moderators: Segrie61, admin

Post Reply
DeanR
Posts: 1
Joined: Thu Aug 08, 2019 1:14 am
Location: Somerset

990 hydraulics

Post by DeanR » Mon Sep 23, 2019 5:39 pm

Hi all
I have recently bought a David brown 990 selectamatic believed to be 1969.it is fitted with front loader and has camels hump and dump valve fitted.the three way valve is the three x tap type.
Changed the oil,level is just above the minimum the problem is the hydraulics work but after 10 minutes of running there is no lift in any setting,this was also the case before the oil change.any help would be very much appreciated.Dean

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests