1967 880 Selectamatic

This is for members to post photos of their restorations, either completed or "works in progress"

Moderators: Segrie61, admin

Post Reply
DRM
Posts: 25
Joined: Thu Oct 17, 2019 11:56 am
Location: Warwickshire

1967 880 Selectamatic

Post by DRM » Mon Feb 10, 2020 11:40 am

Here are some photos of my recently acquired 880. Purchased in October last year, it's had new crankshaft and camshaft oil seals and while we were in there, a new clutch plate. Also has been fitted with a thermostart. I've replaced the fuel tank to reinstate the tank unit and fuel gauge and have a modern three way valve to fit to replace the original 3 tap version.

It didn't have a V5 so have obtained an age-related registration from the DVLA. They gave me a "E" reg although the tractor was most likely manufactured in late 1967 so should really be an "F".

Future jobs are to fit lights and reflectors and completely re-wire. The seat, whilst comfortrable is not original and will be replaced with a pan type. My aim is to get it electrically and mechanically sound and then strip to re-paint it. The blue paint on the bonnet has got to go! It has the original lower grille, gold upper grill and DB badge. 4 new tyres are required at some point.
Attachments
IMG_1736 small.JPG
IMG_1736 small.JPG (187.9 KiB) Viewed 1850 times
IMG_1737 small.JPG
IMG_1737 small.JPG (174.48 KiB) Viewed 1850 times
IMG_1738 small.JPG
IMG_1738 small.JPG (136.56 KiB) Viewed 1850 times
IMG_1739 small.JPG
IMG_1739 small.JPG (147.56 KiB) Viewed 1850 times

DRM
Posts: 25
Joined: Thu Oct 17, 2019 11:56 am
Location: Warwickshire

Re: 1967 880 Selectamatic

Post by DRM » Tue May 19, 2020 10:59 pm

Managed to get a few jobs done on the tractor this weekend. The 3 way valve (rom Richard Pocock and refurbished by Barclay Williams) had been painted a while back and needed fitting. The old three way valve with the missing knobs was removed along with the old trailer tipping pipe.

P1090894 small.JPG
P1090894 small.JPG (92.02 KiB) Viewed 131 times
P1090896 small.JPG
P1090896 small.JPG (93.6 KiB) Viewed 131 times

50 years of gunge was cleaned off and the bolts primed. New o-rings and the more modern 3 way valve was then fitted. This was an option on the 880 but perhaps not in 1967 when the tractor was manufactured. The tipping pipe was then installed which again is a more modern part but a better job I think than the original which would have ended under the seat.

P1090899 small.JPG
P1090899 small.JPG (101.91 KiB) Viewed 131 times
P1090902 small.JPG
P1090902 small.JPG (99.27 KiB) Viewed 131 times
P1090906 small.JPG
P1090906 small.JPG (96.77 KiB) Viewed 131 times
P1090911small.JPG
P1090911small.JPG (95.07 KiB) Viewed 131 times

I also found a replacement clevis bracket on eBay as mine was very worn.

P1090904 small.JPG
P1090904 small.JPG (97.81 KiB) Viewed 131 times

Cadno
Posts: 7
Joined: Tue Mar 17, 2020 11:41 am
Location: Bangor Gwynedd

Re: 1967 880 Selectamatic

Post by Cadno » Fri May 22, 2020 11:32 am

Lovely to see these old tractors getting some attention.
I don't mind some later additions that make the machine more usable.

Cadno
Posts: 7
Joined: Tue Mar 17, 2020 11:41 am
Location: Bangor Gwynedd

Re: 1967 880 Selectamatic

Post by Cadno » Fri May 22, 2020 11:33 am

Agree with you on the seat though, looks totally out of place....

DRM
Posts: 25
Joined: Thu Oct 17, 2019 11:56 am
Location: Warwickshire

Re: 1967 880 Selectamatic

Post by DRM » Tue May 26, 2020 9:31 am

Thanks Cadno! A seat is the next major purchase.

David

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest