Page 2 of 3

Posted: Wed Jan 21, 2009 10:07 pm
by Scooby
admin wrote:All,

Just to second what David said, we (or at least me) would rather have my inbox blocked for a minute or so downloading a large file if it means we get the chance to have a good copy to work with.

Alchad
I'll third that (or did I propose it ?)

Size matters. :wink: :wink: :wink: :wink:

Posted: Wed Jan 21, 2009 10:17 pm
by broadsword
David/Alan

I have the brochures with spec for 770/880/990 and 990/995/996 - If Phil can scan and send the 1494 ok I will ask him to do these as well as my scanner is so so.

Phil - If you can do this for me I will refrain from sarcastic comments towards Hydrashifts for at least a fortnight :roll:

Cheers

Andy

Posted: Wed Jan 21, 2009 10:21 pm
by 6-POT-PHIL
broadsword wrote:David/Alan

I have the brochures with spec for 770/880/990 and 990/995/996 - If Phil can scan and send the 1494 ok I will ask him to do these as well as my scanner is so so.

Phil - If you can do this for me I will refrain from sarcastic comments towards Hydrashifts for at least a fortnight :roll:

Cheers

Andy
What with the price of electric these days H will have a dickie fit!! :roll:

Posted: Wed Jan 21, 2009 10:50 pm
by admin
C'mon Andy, I did put a piccy of your cabriolet 990 up, the least you can do is send me some piccies.

If you DON'T send me some piccies I will post a piccy of your tractor WITH YOU SAT ON IT.

So there. :lol: :lol: :lol: :lol: :lol:

Would be good if you could do this Phil.

:wink: :wink: :wink: :wink: David.

Posted: Wed Jan 21, 2009 10:57 pm
by 6-POT-PHIL
admin wrote:C'mon Andy, I did put a piccy of your cabriolet 990 up, the least you can do is send me some piccies.

If you DON'T send me some piccies I will post a piccy of your tractor WITH YOU SAT ON IT.

So there. :lol: :lol: :lol: :lol: :lol:

Would be good if you could do this Phil.

:wink: :wink: :wink: :wink: David.
I will do my best,i can also send you a photo of a certain cabriolet model broken down on a recovery trailer :roll:

Phil :lol:

Posted: Tue Feb 10, 2009 4:20 pm
by thomasven
just to let you know i sent in 3 pictures 1 of an 880 selectamatic 1 of a 1210 1 of a white 1494 but only the 880 selectamatic has been added on there did you miss some pictures? if you want i will send them again but apart from that the page is looking good

Posted: Wed Feb 11, 2009 5:15 pm
by Scooby
No, I didn't miss any pictures - you did. The the 1210 is on there as well as the 880 and I am grateful for those. But I afraid that we can't use photos like the 1494.

We want nice crisp photos. The Tractor Range will eventually become the de facto reference point for the World to see and marvel at.

Posted: Thu Feb 12, 2009 4:34 pm
by thomasven
how come i can't see the 1210 on there then

Posted: Thu Feb 12, 2009 5:36 pm
by Scooby
thomasven wrote:how come i can't see the 1210 on there then
It might be that you haven't looked properly. Otherwsie I don't know why you can't see it.

Posted: Fri Feb 13, 2009 3:57 pm
by thomasven
if i go onto the photo's link under 1210 syncromesh gear box and there is no pictures in that link once i have clicked on it and brought up the page just to let you know the 1210 has a berthoud spraker on the back to help distinguish it

Posted: Fri Feb 13, 2009 6:12 pm
by Scooby
O.K. Thomas, let us take this one step at a time.

1. Click on DB Tractor Range in the Main Menu.
2. Find the 1210 Manual Gearbox model in the Matrix.
3. Underneath the 1210 picture in the Matrix you will find three words. Info, photos, and spec. Each word is also a clickable link to another page.
4. Move your cursor over the text that says Info.
5. Left click your mouse.

A different screen will appear. It will be the one that I have shown below. That 1210 is your tractor. If you have been looking for one with a "spraker" attached then you will be disappointed. I chopped most of the "sprayer" off.

If you are still struggling after this then go here. http://www.dbtc.co.uk/index.php?module= ... ew&pid=228

Posted: Sat Feb 14, 2009 6:17 pm
by thomasven
i see i was clicking on photo's which is where my 880 picture is

Posted: Wed Feb 18, 2009 4:07 pm
by Guest
Just one point I would like to make, the specification details for the 880, 990 and 1200 Selectamatic has reference to both 2 and 4WD. The 4WD refers to those models fitted with the Selene front driven axle. There is no reference on the sheets to the name Selene.

Posted: Thu Feb 19, 2009 9:52 pm
by Scooby

Posted: Fri Feb 20, 2009 7:49 am
by Guest
Sorry chaps and chapesses, I should have taken a little better notice, the Selene name is referenced in these specs. My apollogies for what seemed to be an unnesecary previous post. Thank you David for pointing it out, teach me to be a little more observant in the future. :roll: :wink: