Rust Proofing

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
munga
Posts: 38
Joined: Thu Jul 08, 2010 9:18 pm
Location: Bristol

Rust Proofing

Post by munga » Sat Sep 25, 2010 12:26 pm

Whats the best rust proofing option to use. I am currently restoring a 770 & 880 with various rust over the wheels & various other places i am not sure whats the best to use before i paint.

Alchad
Posts: 716
Joined: Tue Aug 14, 2007 8:18 pm
Location: Shropshire

RE: Rust Proofing

Post by Alchad » Sat Sep 25, 2010 5:55 pm

Munga,

Hi, try a search on rust proofing and/or rust prevention. This is a subject that gets discussed quite often. I have my own preference - you'll see my name in one of the threads.

Regards

Alchad

User avatar
stormin
Posts: 47
Joined: Fri Aug 21, 2009 5:54 pm
Location: Littleborough, Lancs

Post by stormin » Tue Sep 28, 2010 8:31 pm

Two pack Zinc phosphate epoxy primer. Used on bridges and oil rigs, so can't be bad. It's not the cheapest stuff but it's not porous like other primers. Top coat with whatever you want afterwards.

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests