Drawing

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

Please note the Forum Site is not managed by David Brown Tractor Club Ltd only hosted

DISCLAIMER -

David Brown Tractor
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services


Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email callysmith95@outlook,com giving your username.

Amended 27/10/18

Moderator: admin

Post Reply
User avatar
cobbadog
Posts: 1354
Joined: Tue Oct 11, 2011 6:18 am
Location: beautiful Coopernook NSW. near Taree. NSW. Australia

Drawing

Post by cobbadog » Sun May 02, 2021 5:39 am

Some time ago I had a customer come to me with a problem with his blinds and I fixed them while he waited. While he was there he spotted my Series1 30C which bought back memories of his younger days back in the UK. This guy was a bit add but still nice enough and then he asked all about it and if I would start it up and park it out in the yard and he take a photo of it.
Once put away he went out to his ute and bought back a large folder of drawing that he had done over the years and now he made this one for us and one for himself. Now before the 'die hards' go mad and pick it to pieces this is a blended tractor that he decided to add and subtract parts from a few models. So no mine does not have the thermometer in the bonnet and not too many other DB have my short leg steps beneath the foot plates, number plate in the wrong position and so on. Just thought since I like the image very much I thought I would post it up and share.
Attachments
David Watermarked.jpg
David Watermarked.jpg (57.81 KiB) Viewed 419 times

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests