Loader - Replacement Rams

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Alchad
Posts: 716
Joined: Tue Aug 14, 2007 8:18 pm
Location: Shropshire

Loader - Replacement Rams

Post by Alchad » Wed Oct 23, 2019 6:06 pm

Hi,

The hydraulic rams on my loader are starting to leak a fair bit, I had them resealed about 8 years ago but was warned they were not in the best of condition. So looking to replace them and also thinking of going double acting.

Googling around there seems to be quite a few suppliers - Ramko, Flowfit, Steerforth to name a few. Just wondered if anyone had experience of any of them - or others and any recommendations.

Thanks

Alchad

User avatar
cobbadog
Posts: 682
Joined: Tue Oct 11, 2011 6:18 am
Location: beautiful Coopernook NSW. near Taree. NSW. Australia

Re: Loader - Replacement Rams

Post by cobbadog » Thu Oct 24, 2019 5:50 am

You would have to ask around as to price and quality of the products and if my very basic knowledge of hydraulics is right you will need to re plumb the rams to be a double acting circuit along with control valves. Sounds pricey but if it will improve it to what you expect then do it.
Is it an option to have your existing rams reconditioned, ie, machined up and re chromed then all new seals or new replacement single acting rams?

User avatar
dbiow
Posts: 77
Joined: Sat Apr 30, 2016 4:20 pm
Location: Isle of Wight

Re: Loader - Replacement Rams

Post by dbiow » Fri Oct 25, 2019 11:59 pm

Which
H model loader do you have? There may be some good second hand ones around. If it’s any help I have a set from a 995 tractor in good condition, I can check the loader model for you if there if interest?
885 q cab and 25d on the Isle of Wight.

Gard
Posts: 255
Joined: Sun Apr 06, 2008 2:25 pm
Location: Fairfax Vermont USA

Re: Loader - Replacement Rams

Post by Gard » Sun Oct 27, 2019 6:38 pm

You will be more lucky than me if you can find a new replacement cylinder that fits, correct length extended and contracted as well as correct ends. A good repair shop should be able to build parts needed to repair the old one, new shaft, piston etc. That is what I have had to do,

SteveCollett
Posts: 583
Joined: Wed Sep 24, 2008 8:17 am
Location: Suffolk

Re: Loader - Replacement Rams

Post by SteveCollett » Mon Oct 28, 2019 8:17 am

Dennis Lee at Little Snoring in Norfolk will be able to sort them out, but a fair distance from you.

Post Reply

Who is online

Users browsing this forum: blissakpo and 6 guests