Power assist ram

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Mossop
Posts: 21
Joined: Thu Jul 18, 2019 6:36 pm
Location: Perthshire

Power assist ram

Post by Mossop » Thu Jul 25, 2019 9:57 pm

Hi , wonder if anyone can help me , I've bought myself a 68 990 selectomatic that needs a bit of tlc, it has the power assist single steering ram on it but the steering g lever was knackered but the ball joint that goes into the steering lever has come to grieve in the past and they welded the but on , so long story short can I get a replacement ball that goes inside the ram or can i get a normal ball joint from a more modern power steering ram and cut the casing of to put in the end of the ram , or anyone got a spare ram I could have , long winded hope it makes sense , many thanks

tomryall
Posts: 159
Joined: Sun Jun 03, 2007 4:53 am
Location: canada

Re: Power assist ram

Post by tomryall » Thu Jul 25, 2019 10:09 pm

Try David Brown parts they should have all the parts you need.

Mossop
Posts: 21
Joined: Thu Jul 18, 2019 6:36 pm
Location: Perthshire

Re: Power assist ram

Post by Mossop » Fri Jul 26, 2019 8:21 pm

Time talk tried them , the ball joint goes inside the ram itself , going to try a normal ball joint and cut the casing of the ball if you know what I mean

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests