90 series with bale wappers

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

90 series with bale wappers

Post by Wheelie » Sun Jun 23, 2019 9:28 pm

Hi just wondering has anyone used a 1390 with a round bale silage wrapper,never used one before and was thinking of buying a wrapper, would a 1390 suit one and what's the main set up needs for a wrapper?thanks

User avatar
bedwards1966
Posts: 857
Joined: Sun Mar 07, 2010 10:36 pm
Location: North Yorkshire

Re: 90 series with bale wappers

Post by bedwards1966 » Sun Jun 23, 2019 9:50 pm

As far as I know (I used to wrap thousands of bales, but only with one wrapper) wrappers just need a continuous oil feed from a spool and of course a return. An electric supply is needed for those with a control box, some are all manually controlled. I can't see any reason why a 1390 wouldn't be good for the job.

User avatar
GeoffDEAL
Posts: 404
Joined: Tue Jan 27, 2009 8:25 am
Location: New Zealand

Re: 90 series with bale wappers

Post by GeoffDEAL » Sun Jun 23, 2019 10:09 pm

Hi used my 1394 on a 654 New Holland some years ago and worked alright, was usually using a 1494 at the time and now use the 1690t for baling. There was little difference between the 1394 and the 1494 as the 1494 is without its turbo .

User avatar
ljd
Posts: 35
Joined: Wed Jan 28, 2009 12:12 am
Location: NEW ZEALAND

Re: 90 series with bale wappers

Post by ljd » Mon Jun 24, 2019 5:16 am

Hi I use my 1212, 1494, 1694 on my tenco 1060a wrapper with no problem at all. the only thing it needs a good 12volt power supply for the control box. I have thousand of bales with it.

Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

Re: 90 series with bale wappers

Post by Wheelie » Mon Jun 24, 2019 2:55 pm

Great info thanks a mill, yeah reckon should be no problem then,i know this is nothing to do with David Browns but is there anything to watch for on them wrappers if looking at one?

Post Reply

Who is online

Users browsing this forum: db2d, dbiow, Henry&Saly and 17 guests