900 seat and mudguard

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Gard
Posts: 226
Joined: Sun Apr 06, 2008 2:25 pm
Location: Fairfax Vermont USA

900 seat and mudguard

Post by Gard » Tue Apr 09, 2019 10:46 pm

I have started working on seat and mudguard. I have more time than money at this point so am trying to repair and reuse as many parts as possible. I know the seat support system is not correct but am not too sure what it is supposed to look like. I am repairing the battery box and am using a photo from the web as a general guide, the drawing from the parts manual is not too clear. I will add "ears" for seat pivot points to the front and a platform to the back of the battery box. I think this platform supports the rubber bumpers. However it is not clear to me what the bottom of the seat should look like and how it attaches to these ears. Can anyone point me to a photo or other info?
I am looking to get something functional, it would be a bonus if it is somewhat close to original.
Attachments
Battery box (Small).png
Battery box (Small).png (221.13 KiB) Viewed 155 times
seat parts (Small).PNG
seat parts (Small).PNG (204.03 KiB) Viewed 155 times
KIMG0185 (2) (Small).JPG
KIMG0185 (2) (Small).JPG (118.71 KiB) Viewed 155 times

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests