Page 1 of 1

770 780 siroco roll bar

Posted: Mon Mar 11, 2019 8:59 pm
by Richie
Hello, a new member on the forum is selling a selectamatic 770/ 780 roll frame, does anyone know if it will fit an 885 ? Cheers richie

Re: 770 780 siroco roll bar

Posted: Mon Mar 11, 2019 9:01 pm
by Henry&Saly
Richie, I am the new member with the roll bar.

Sadly however I don’t know the answer to your question!

Good luck

Henry

Re: 770 780 siroco roll bar

Posted: Tue Mar 12, 2019 8:30 am
by ollek
I would suspect that a roll bar for a 770 or a 780 is not officially approved for a 885, but I am not sure, but check it before you fit it.

Re: 770 780 siroco roll bar

Posted: Tue Mar 12, 2019 1:23 pm
by SteveCollett
fairly certain that they should be ok. Normally these roll bars have their approval printed on them if not they are not legal anyway.

Re: 770 780 siroco roll bar

Posted: Tue Mar 12, 2019 6:23 pm
by joeproctor
does your 885 have flat top mudguards?if yes then why not opt for the db roll bar/cab frame.,
i'm not certain but the flat top mudguards will not allow the scirroco type roll bar to fit withou seeing some pictures of roll bar and tractor

Re: 770 780 siroco roll bar

Posted: Thu Mar 14, 2019 7:42 am
by Richie
Thanks for reply’s chaps, I have a dB frame but can’t get in low shed with it, the siroco frames come down and into the back of the axle so was hoping to adapt square type mudgaurds? Cheers rich

Re: 770 780 siroco roll bar

Posted: Sun Mar 17, 2019 3:56 am
by cobbadog
Is it possible to make the roll bar you have to a collapsable one?

Re: 770 780 siroco roll bar

Posted: Sun Mar 17, 2019 5:59 am
by ollek
Safety regulations are strict. Do not make any modifications or repairs to a approved safety device. A roll bar is one example of a part that should not be modified, altered or repaired in any way.