Ware to mount loader joystick in a 1394

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Mover
Posts: 21
Joined: Sun Aug 12, 2018 6:29 pm
Location: County Durham

Ware to mount loader joystick in a 1394

Post by Mover » Sun Mar 10, 2019 6:46 pm

I am going to be fitting a cable operated joystick in the 1394 for the loader.

Looking for ideas as to the best location to mount the joystick, so as not to interfere with other controls. Ideally it would mount ware the gearstick lives but for obvious reasons that’s not possible. The only location that stands out is near the windscreen to the right of the dash but it is a bit of a Stretch, any closer to the operator and it interferes with the hydra-shift control.

Henry&Saly
Posts: 30
Joined: Tue Jan 29, 2019 7:10 pm
Location: Shropshire

Re: Ware to mount loader joystick in a 1394

Post by Henry&Saly » Sun Mar 10, 2019 7:40 pm

We had ours on the right hand side of the dash. It was a stretch but you get used to it.

jazo
Posts: 771
Joined: Fri Jun 15, 2007 7:13 am
Location: New Zealand

Re: Ware to mount loader joystick in a 1394

Post by jazo » Tue Mar 12, 2019 7:22 pm

Hi, I moved my hydrashift lever over to the rhs console when I brought my tractor a few years ago and when I fitted my loader last year I used the old hydrashift mounting holes in the dash for the joystick. Works well
1394 4wd
1294 4wd
30D
990x2
880
780x2
900

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests