1412 spool valve cables

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.


David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Posts: 44
Joined: Wed Aug 15, 2018 11:14 pm
Location: DEVON

1412 spool valve cables

Post by starider » Sun Feb 03, 2019 10:38 pm

Hi, can anyone help please? I need to replace 2 of the loader cables on my 1412. I've looked on all the web sites for tractor spares to no avail. The levers are marked Vapormatic and that end of the cable uses a clevis,the problem is the spool valve end which fits onto the valve.The end which goes on the end of the valve has a fixed cap which goes over the end of the valve, an ordinary pin then goes through both parts and when the retaining cover goes onto the spool valve block to fix the cable, the top prevents the pin from coming out. I can't find any cable which has this end cap. Any help ASAP would be greatly appreciated as the loader is down and I can't move the tractor!!! .....................starider :?:

Posts: 773
Joined: Fri Jun 15, 2007 7:13 am
Location: New Zealand

Re: 1412 spool valve cables

Post by jazo » Mon Feb 04, 2019 5:22 am

Hi, I think walvoil valve banks use the end you describe, they are on a lot of loader banks. You can manually push or pull the spool to lift the loader if you need to move it aswell
1394 4wd
1294 4wd

Posts: 44
Joined: Wed Aug 15, 2018 11:14 pm
Location: DEVON

Re: 1412 spool valve cables

Post by starider » Sun Mar 24, 2019 10:43 pm

Hi, gave up in the end and purchased new levers and cables.In each package was a universal fitting kit which contained the correct spool valve fitting.A little expensive, but job done and all is working perfectly......................starider :D

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests