Page 1 of 1

Wiper wheel box 1412

Posted: Wed Jan 02, 2019 10:15 am
by starider
Hi, does anyone know where I can obtain a windscreen wiper wheel box,either new or second hand[Q cab]? I have a heater matrix available if anyone needs one in excellent condition...........................................starider :wink:

Re: Wiper wheel box 1412

Posted: Wed Jan 02, 2019 7:31 pm
by Ian
I am not sure if they are the same but I have a early 1690 one that is dead sitting on the workshop floor awaiting it's last trip

Re: Wiper wheel box 1412

Posted: Sat Jan 05, 2019 12:44 am
by starider
Hi, would be interested,not sure if it's the same, but willing to risk it. Send me a PM with how much you want for it[inc postage].Many thanks...........starider :)

Re: Wiper wheel box 1412

Posted: Sat Jan 05, 2019 9:16 am
by Richie
Hi starider, is it the same as 72 995 as I will have one somewhere.if it is il find it and you can have it just pay postage. Cheers richie

Re: Wiper wheel box 1412

Posted: Sat Jan 05, 2019 5:08 pm
by starider
Hi, not sure if the same.Mine has had the shaft[6mm / 1/4" Dia], which the wiper arm clamps onto, broken off, so an arm can't be fitted. The gear wheel is 44mm / 1 3/4" Dia and the shaft needs to be at least 70mm long.Many thanks.............................starider :)

Re: Wiper wheel box 1412

Posted: Sat Jan 05, 2019 5:30 pm
by Richie
Ok starider il take a look tomorrow and if it’s compatible we’l Sort logistics. Rich

Re: Wiper wheel box 1412

Posted: Wed Jan 16, 2019 7:53 pm
by starider
Hi, with a little patience and some skill I stripped the wheel box,found some silver steel and replaced the spindle and all is working fine. Thanks for the interest shown.......................starider :)

Re: Wiper wheel box 1412

Posted: Sun Jan 20, 2019 8:06 pm
by Richie
Nice one starider, I have found an old motor if you should get problems. Rich

Re: Wiper wheel box 1412

Posted: Thu Jan 24, 2019 7:58 pm
by starider
Hi Rich,
Is it the wheel box you have? i.e.part that goes through the cab and the wiper arm bolts onto the outer spindle,the inner end has a large gear driven be a cable from the wiper motor.. If the part you have is as described I would be interested.
Thanks...........................starider :)