Front weights

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

Front weights

Post by Wheelie » Sat Dec 29, 2018 3:46 am

Hi does anyone know if the front weights for the 90 series 2wd are the same as the 996 type? have seen 4 of them advertised they are the L shape type and looks to be the same set up on the front frame as is on the frame I have,just wondering if alot of them were a standard type weight or were there different sizes and weight of that L shape type? Thanks

Ian
Posts: 48
Joined: Wed Oct 03, 2018 12:03 pm
Location: Dumfries and Galloway

Re: Front weights

Post by Ian » Sat Dec 29, 2018 7:42 am

The weights on a 90 series are water weights not the L shape

Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

Re: Front weights

Post by Wheelie » Sat Dec 29, 2018 9:37 am

Water weights! certainly wouldn't have guessed that,they definitely look to be the same kind of fit though,and the bolt through each one,thanks

tomryall
Posts: 143
Joined: Sun Jun 03, 2007 4:53 am
Location: canada

Re: Front weights

Post by tomryall » Sat Dec 29, 2018 2:38 pm

water should read wafer. things are often described wrong in ads.

Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

Re: Front weights

Post by Wheelie » Sun Dec 30, 2018 9:13 am

Right yeah I see,I don't know much about the weight terminology,but I checked them out on internet images and the type of weights for the frame on this tractor must definitely be the L shaped type, with the bar underneath where the ends rest on too.What amount of kgs would be in any of them weights anyway?

User avatar
ollek
Posts: 3741
Joined: Tue Apr 10, 2012 1:20 pm
Location: South West Finland

Re: Front weights

Post by ollek » Sun Dec 30, 2018 10:48 am

The 996 parts catalogue tells the weight for the L-shaped front weights. https://partstore.caseih.com/us/parts-s ... 4ar1307496

User avatar
cobbadog
Posts: 549
Joined: Tue Oct 11, 2011 6:18 am
Location: beautiful Coopernook NSW. near Taree. NSW. Australia

Re: Front weights

Post by cobbadog » Mon Dec 31, 2018 2:53 am

Hi Ollek,
I just opened the link for those front weights and could not seem to find where it mentions the weight. Did I miss something?

User avatar
db2d
Posts: 2061
Joined: Fri Feb 24, 2012 10:01 pm
Location: Monmouthshire

Re: Front weights

Post by db2d » Mon Dec 31, 2018 3:57 am

Number 6
6 weights 67lb each.

User avatar
ollek
Posts: 3741
Joined: Tue Apr 10, 2012 1:20 pm
Location: South West Finland

Re: Front weights

Post by ollek » Mon Dec 31, 2018 6:58 am

cobbadog, following the ref number 6 on the text page, you will find the part number and then the text "weight" followed by "ballast weight, 67 lb" and in the quantity column there is stated 6.

SteveCollett
Posts: 561
Joined: Wed Sep 24, 2008 8:17 am
Location: Suffolk

Re: Front weights

Post by SteveCollett » Mon Dec 31, 2018 1:35 pm

my memory is that all the L shaped weights were the same

Wheelie
Posts: 67
Joined: Mon Oct 30, 2017 8:42 pm
Location: Ireland

Re: Front weights

Post by Wheelie » Tue Jan 01, 2019 1:18 am

Yeah the same size you think,they look like a nice tidy weight,a fella has some at 80 euro a piece,don't know the going price for them but probably worth that I suppose, wouldn't be long spending a few quid on a set!!

User avatar
cobbadog
Posts: 549
Joined: Tue Oct 11, 2011 6:18 am
Location: beautiful Coopernook NSW. near Taree. NSW. Australia

Re: Front weights

Post by cobbadog » Tue Jan 01, 2019 2:26 am

thank you db2d and ollek, I couldn't see the forest for the trees.

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests