Page 1 of 1

DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Mon Sep 03, 2018 3:34 pm
by Highland Pony
Could anyone tell me where to top up the Hydraulic oil on the 1190. I have an owners manual (re-print) but it doesn't provide a diagram.

Also, what type/make of oil would people recommend?

Finally, the tractor is fitted with a Quicke 2300 loader and on of the rams is leaking slightly. Can anyone advise where to purchase some new seals

Many thanks

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Mon Sep 03, 2018 7:06 pm
by bedwards1966
I can't answer the other questions but for seals the best option tends to be taking them to a local bearing/seal etc supplier who will measure them up and provide replacements.

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Mon Sep 03, 2018 7:16 pm
by wheelbarrow
Oil filler plug is at the rear of the tractor, just to the right of the middle part there is a round plug with a squarish hole in it. Oil goes in there.

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Tue Sep 04, 2018 6:03 pm
by Highland Pony
Thanks wheelbarrow, I'll have a look when I get home. What oil do you put in yours?

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Wed Sep 05, 2018 11:01 am
by ollek
I thought that I wold no more take part in any discussions on this forum, but after looking on replies to these questions, I have decided to try to give the correct information's in a understandable format. Please read the following: "I am sure that the information about the oil filler and the recommended oil quality is mentioned in the Operators Manual, please look again. The filler is a plugged 90 degrees pipe bend in the rear right hand corner of the pto housing. The oil to use is Super Tractor Oil Universal (STOU) GL-4, with a viscosity of 10W-30 or 15W-30. The hydraulic system uses transmission oil in David Brown tractors. For the loader seal, Google Quicke uk. I am sure that there is an importer in UK for the loader".

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Wed Sep 05, 2018 12:56 pm
by Lofty
Welcome back ollek.

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Wed Sep 05, 2018 4:18 pm
by Highland Pony
I don't suppose anyone could post a photo or diagram of the Hydraulic oil filer?

Re: DB 1190 - Hydraulic Oil Filler/Ram Seals

Posted: Wed Sep 05, 2018 5:34 pm
by ollek
It can not be that difficult, please use your eyes. Here is a link to a drawing from the parts catalogue https://partstore.caseih.com/us/parts-s ... 7ar1293233 Ref 2 is the 90 degrees pipe bend and ref 3 is the plug you have to open.