950 quadrant pictures
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
950 quadrant pictures
i have almost finished restoring a 950 early model (dash like a cropmaster) it came to me with the mudguards missing,i need a picture of the quadrant position so that i can get it fitted and working.
can you help?
can you help?
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
Re: 950 quadrant pictures
i have over 80 hits on this subject has no one got a 950 they can take a photo of the quadrant lever assembly in situ?
- cobbadog
- Posts: 684
- Joined: Tue Oct 11, 2011 6:18 am
- Location: beautiful Coopernook NSW. near Taree. NSW. Australia
Re: 950 quadrant pictures
Sorry mate I have no pics of what you need.
Re: 950 quadrant pictures
I suddenly remembered that I have some brochure scans Joe and I had a look. I found 2 that show the 950 hydraulic controls but they are different so I have attached them both but neither are very clear. I also have 950 spares books but they don't show how they are mounted. Let me know which one is applicable and I'll crop the photo. and enlarge the relevant bit to make it a bit clearer.
- Attachments
-
- 950 Imp012.jpg (102.34 KiB) Viewed 2432 times
-
- 950 Imp017.jpg (125.33 KiB) Viewed 2432 times
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
Re: 950 quadrant pictures
scooby, could you send these to my email address
regards
joe
regards
joe
Re: 950 quadrant pictures
Yes Joe, I'll send these and the link box ones. DL.
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
Re: 950 quadrant pictures
thank you for the email, just the job!
regards
joe
regards
joe
Re: 950 quadrant pictures
You're welcome Joe. It's what we do at planet DB.

Re: 950 quadrant pictures
I have asked a friend to take some pictures of the quadrant on his tractor. It will be a few days before I get them.
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
Re: 950 quadrant pictures
thank you mr db2d much appreciated, hope you received my letter!
regards
joe
regards
joe
-
- Posts: 583
- Joined: Wed Sep 24, 2008 8:17 am
- Location: Suffolk
Re: 950 quadrant pictures
Those pictures look to me like the later 950 control the earlier one was quite different, sorry I have no pictures
Re: 950 quadrant pictures
Please consider that there was an 950 with a hydraulic system almost as the one in a 25D. That is with the hydraulic control lever fitted to the right hand side mud guard. These tractors had a hydraulic system with lift, hold, lower and TCU. And then there was a 950 Implematic with a completely different hydraulic system. That is with the hydraulic lever fitted to a housing in front of the rear axle. The top picture supplied by Scooby is from a 950 Implematic. The hydraulic system in Implematic tractors had lift, hold, lower, TCU end draught control via a spring loaded top link. Later Implematic tractors also has height control by moving the cable from the top link to the end of the cross haft.
-
- Posts: 1738
- Joined: Fri Dec 30, 2005 3:07 pm
- Location: drax, nr, selby, north yorkshire
- Contact:
Re: 950 quadrant pictures
steve the bottom picture that scooby has posted is the early type i need a side on picture to show where the lever quadrant mounts and showing the tie rods position on the actuators on the axle
Who is online
Users browsing this forum: No registered users and 14 guests