950 quadrant pictures

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

950 quadrant pictures

Post by joeproctor » Wed Mar 07, 2018 7:00 pm

i have almost finished restoring a 950 early model (dash like a cropmaster) it came to me with the mudguards missing,i need a picture of the quadrant position so that i can get it fitted and working.
can you help?

joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: 950 quadrant pictures

Post by joeproctor » Fri Mar 16, 2018 8:29 pm

i have over 80 hits on this subject has no one got a 950 they can take a photo of the quadrant lever assembly in situ?

User avatar
cobbadog
Posts: 682
Joined: Tue Oct 11, 2011 6:18 am
Location: beautiful Coopernook NSW. near Taree. NSW. Australia

Re: 950 quadrant pictures

Post by cobbadog » Sun Mar 18, 2018 3:23 am

Sorry mate I have no pics of what you need.

Scooby
Posts: 3931
Joined: Tue Jan 03, 2006 8:16 pm
Location: Warwickshire

Re: 950 quadrant pictures

Post by Scooby » Sun Mar 18, 2018 10:28 am

I suddenly remembered that I have some brochure scans Joe and I had a look. I found 2 that show the 950 hydraulic controls but they are different so I have attached them both but neither are very clear. I also have 950 spares books but they don't show how they are mounted. Let me know which one is applicable and I'll crop the photo. and enlarge the relevant bit to make it a bit clearer.
Attachments
950 Imp012.jpg
950 Imp012.jpg (102.34 KiB) Viewed 2411 times
950 Imp017.jpg
950 Imp017.jpg (125.33 KiB) Viewed 2411 times
Image Image

Three is twee, four does snore, but 6 just clicks........Scooby

joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: 950 quadrant pictures

Post by joeproctor » Sun Mar 18, 2018 3:26 pm

scooby, could you send these to my email address
regards
joe

Scooby
Posts: 3931
Joined: Tue Jan 03, 2006 8:16 pm
Location: Warwickshire

Re: 950 quadrant pictures

Post by Scooby » Sun Mar 18, 2018 4:41 pm

Yes Joe, I'll send these and the link box ones. DL.
Image Image

Three is twee, four does snore, but 6 just clicks........Scooby

joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: 950 quadrant pictures

Post by joeproctor » Sun Mar 18, 2018 9:59 pm

thank you for the email, just the job!
regards
joe

Scooby
Posts: 3931
Joined: Tue Jan 03, 2006 8:16 pm
Location: Warwickshire

Re: 950 quadrant pictures

Post by Scooby » Sun Mar 18, 2018 10:04 pm

You're welcome Joe. It's what we do at planet DB. :D
Image Image

Three is twee, four does snore, but 6 just clicks........Scooby

User avatar
db2d
Posts: 2122
Joined: Fri Feb 24, 2012 10:01 pm
Location: Monmouthshire

Re: 950 quadrant pictures

Post by db2d » Sun Mar 18, 2018 11:43 pm

I have asked a friend to take some pictures of the quadrant on his tractor. It will be a few days before I get them.

joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: 950 quadrant pictures

Post by joeproctor » Tue Mar 20, 2018 6:31 am

thank you mr db2d much appreciated, hope you received my letter!
regards
joe

SteveCollett
Posts: 583
Joined: Wed Sep 24, 2008 8:17 am
Location: Suffolk

Re: 950 quadrant pictures

Post by SteveCollett » Tue Mar 20, 2018 11:40 am

Those pictures look to me like the later 950 control the earlier one was quite different, sorry I have no pictures

User avatar
ollek
Posts: 3868
Joined: Tue Apr 10, 2012 1:20 pm
Location: South West Finland

Re: 950 quadrant pictures

Post by ollek » Tue Mar 20, 2018 1:18 pm

Please consider that there was an 950 with a hydraulic system almost as the one in a 25D. That is with the hydraulic control lever fitted to the right hand side mud guard. These tractors had a hydraulic system with lift, hold, lower and TCU. And then there was a 950 Implematic with a completely different hydraulic system. That is with the hydraulic lever fitted to a housing in front of the rear axle. The top picture supplied by Scooby is from a 950 Implematic. The hydraulic system in Implematic tractors had lift, hold, lower, TCU end draught control via a spring loaded top link. Later Implematic tractors also has height control by moving the cable from the top link to the end of the cross haft.

joeproctor
Posts: 1738
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: 950 quadrant pictures

Post by joeproctor » Tue Mar 20, 2018 6:50 pm

steve the bottom picture that scooby has posted is the early type i need a side on picture to show where the lever quadrant mounts and showing the tie rods position on the actuators on the axle

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests