Fitting LQ9 loader brackets

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
davew
Posts: 20
Joined: Thu Jun 25, 2015 8:06 am
Location: Pembrokeshire

Fitting LQ9 loader brackets

Post by davew » Sun Dec 31, 2017 6:53 pm

Im fitting an LQ9 loader to my 995 and need some guidance to fitting the brackets. Started with the left hand side and Im not sure how the power steering ram bracket fits or maybe I need a specific bracket for the power steering. The inside of the loader bracket has 2 raised lugs near the front (to offset the bracket from the frame) but none at the back so I assume the power steering bracket somehow fits behind the loader bracket. Any guidance or photos of the setup would be helpful. Thanks

User avatar
davew
Posts: 20
Joined: Thu Jun 25, 2015 8:06 am
Location: Pembrokeshire

Re: Fitting LQ9 loader brackets

Post by davew » Wed Jan 03, 2018 6:30 pm

My bracket is number 22 K926193 in the diagram.
https://partstore.caseih.com/us/parts-s ... 7bi4588788
I cannot find any reference to any other brackets. Maybe I will need to modify mine to fit - although the danger maybe weakening the bracket.
I assume the Lf9 is similar - anyone got a picture of their setup?

jazo
Posts: 771
Joined: Fri Jun 15, 2007 7:13 am
Location: New Zealand

Re: Fitting LQ9 loader brackets

Post by jazo » Thu Jan 04, 2018 5:14 am

Hi, unsure of your loader setup but is it not able to bolt on the outside of the loader frame using the same mounting holes?
1394 4wd
1294 4wd
30D
990x2
880
780x2
900

User avatar
davew
Posts: 20
Joined: Thu Jun 25, 2015 8:06 am
Location: Pembrokeshire

Re: Fitting LQ9 loader brackets

Post by davew » Thu Jan 04, 2018 11:10 am

I have attached a photo of my set up with the loader bracket lines up. The steering bracket originally attached to the rear 4 bolt holes. Now only 2 are exposed to the rear of the loader. There is a flange in the way so I cannot bolt on the top. I suppose I could cut a slot in the steering bracket so it slides behind. This is why there must be a bracket designed for loafers.

User avatar
davew
Posts: 20
Joined: Thu Jun 25, 2015 8:06 am
Location: Pembrokeshire

Re: Fitting LQ9 loader brackets

Post by davew » Thu Jan 04, 2018 11:27 am

Brackets
Attachments
B5078B07-1346-4C47-B76F-5CF21D8854F7.jpeg
Steering bracket
B5078B07-1346-4C47-B76F-5CF21D8854F7.jpeg (131.58 KiB) Viewed 1560 times
BC8E5C13-1C39-40F6-BA3E-ACD6267002AD.jpeg
BC8E5C13-1C39-40F6-BA3E-ACD6267002AD.jpeg (131.58 KiB) Viewed 1560 times
C6CD70CC-0283-4E93-900A-4604494BBFF2.jpeg
C6CD70CC-0283-4E93-900A-4604494BBFF2.jpeg (131.58 KiB) Viewed 1560 times

User avatar
mart1602
Posts: 433
Joined: Wed Jun 23, 2010 6:45 pm
Location: pembs
Contact:

Re: Fitting LQ9 loader brackets

Post by mart1602 » Thu Jan 04, 2018 9:48 pm

looking at the last photo i would say the loader braket needs moving back one hole

User avatar
davew
Posts: 20
Joined: Thu Jun 25, 2015 8:06 am
Location: Pembrokeshire

Re: Fitting LQ9 loader brackets

Post by davew » Fri Jan 05, 2018 12:37 pm

It looks that way - however the forward holes all line up with the chassis holes. I think a steering bracket slots behind loader bracket for the first 2 holes as there is a recess there and the bolts onto the rear 2 holes that you can see exposed in the image

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests