where does this small part fit Selectamatic 990?

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
Wheelrim
Posts: 14
Joined: Mon May 29, 2017 2:23 pm
Location: NR9 3LG

where does this small part fit Selectamatic 990?

Post by Wheelrim » Tue Dec 05, 2017 8:48 pm

I have almost refitted all parts on refurbishment of the 1968 engine.

I had labelled containers so that I knew where removed parts fit.

BUT I remember near the end of disassembly stage thinking "I will easily remember where this part fits".

My brain has stopped working.

Please does anyone recognise the part and can advise me where it belongs.

It is 3/4" (18mm) long, 1/2" (12 mm) diameter and has a 3/8" (just over 9mm) thread
Attachments
P1020316.JPG
P1020316.JPG (172.18 KiB) Viewed 1131 times
P1020317.JPG
P1020317.JPG (169.21 KiB) Viewed 1131 times
P1020319.JPG
P1020319.JPG (173.38 KiB) Viewed 1131 times
P1020320.JPG
P1020320.JPG (175.66 KiB) Viewed 1131 times

1952CROPMASTER
Posts: 90
Joined: Thu Dec 15, 2016 12:24 pm
Location: Moncton NB

Re: where does this small part fit Selectamatic 990?

Post by 1952CROPMASTER » Fri Dec 08, 2017 12:48 am

To me it looks like the inside of a Gear Shift ball (Knob)

jazo
Posts: 772
Joined: Fri Jun 15, 2007 7:13 am
Location: New Zealand

Re: where does this small part fit Selectamatic 990?

Post by jazo » Fri Dec 08, 2017 6:59 am

Yeah that's what I thought but I thought they would be brass?
1394 4wd
1294 4wd
30D
990x2
880
780x2
900

Wheelrim
Posts: 14
Joined: Mon May 29, 2017 2:23 pm
Location: NR9 3LG

Re: where does this small part fit Selectamatic 990?

Post by Wheelrim » Fri Dec 08, 2017 8:48 pm

Thank you for the remarkable knowledge and understanding.
Yes, I now remember after I had DB 990 towed to my property, I then moved the gear levers and one gear lever ball disintegrated in my hand.
I then removed said item to establish the type of thread.

Hopefully sometime in the future I can help others.

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests