Improving operator comfort on my Crommaster

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
John.Newman
Posts: 267
Joined: Sun May 27, 2007 3:21 am
Location: Gowrie Junction, via Toowoomba, Qld, Australia

Improving operator comfort on my Crommaster

Post by John.Newman » Mon Jun 05, 2017 12:42 pm

Anyone who is vertically inhanced may find the Cropmaster a bit cramped to sit on. To give me a bit more leg and foot room, I made a couple of spacers from 2" angle steel and 2 " flat bar welded as shown below. No new mounting holes had to be drilled in the seat frame which made this easy to fit.
IMG_0566 (Copy).JPG
IMG_0566 (Copy).JPG (25.1 KiB) Viewed 1125 times
Attachments
IMG_0567 (Copy).JPG
IMG_0567 (Copy).JPG (23.55 KiB) Viewed 1125 times

Gard
Posts: 235
Joined: Sun Apr 06, 2008 2:25 pm
Location: Fairfax Vermont USA

Re: Improving operator comfort on my Crommaster

Post by Gard » Mon Jun 05, 2017 2:04 pm

nice job on that

joeproctor
Posts: 1736
Joined: Fri Dec 30, 2005 3:07 pm
Location: drax, nr, selby, north yorkshire
Contact:

Re: Improving operator comfort on my Crommaster

Post by joeproctor » Mon Jun 05, 2017 6:26 pm

well done ,good feature for long legs!

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests