Page 1 of 1

excessive backlash in transmission 880 selectamatic

Posted: Thu Jan 21, 2016 7:40 pm
by peislander
i bought an older 880 selectamatic which has excessive backlash in transmission. 12 speed with 3 gearshifts. was looking on youtube and
seen someone replace clutch by removing top cover without splitting tractor,removing input shaft then clutch. if it is bearinrings on input
shaft can replacement be accomplished without splitting tractor. Also
what pressure should a compression test show (excellent-acceptable) thanks

RE: excessive backlash in transmission 880 selectamatic

Posted: Thu Jan 21, 2016 9:49 pm
by odin
It is possible to remove the transmission without splitting. But I recommend that you get a manual for your questions.