1490 3 point hitch

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
erkki
Posts: 2032
Joined: Sun Apr 09, 2006 12:02 pm
Location: North Finland

RE: 1490 3 point hitch

Post by erkki » Thu Oct 08, 2015 6:38 pm

Hmmm. I doubt that its plugged orfice or sticky valve. Plugged orfice just makes the rear lift die. If hold-releaase valve is stuck, the arms do not lower at all. Open the steel cover on the RHS of the cross shaft and look in. You see essential valve chest controls behind the cover. You see a nylon fork on the lower end of the selector shaft. There is a rocker bar rear end in the fork. You can push a screwdriver tip above the rocker bar and tilt it so that the opposite end of the rocker bar jumps up. The arms shall lower to the downmost position. If you can make that happen its time to look the problem from the adjustments of the control mechanism. If no joy, the problem can be in the lift ram. You can try to let oil out from the ram by loosening three way valve, or if there is a plug on the fender side face of the three way valve, loosen it and see what happens. Oil shall escape from the ram, so beware not to cause a mess. Try those tricks first and tell us what you found out.

W.B.R erkki

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests