hydraulic lever problem

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
tom1490
Posts: 4
Joined: Sun May 04, 2014 8:27 pm
Location: Stirlingshire

hydraulic lever problem

Post by tom1490 » Wed May 06, 2015 10:00 pm

Hi Guys
I have bought a 1490 and the three point linkage lever seems to want to raise on its own accord.
Any ideas?

JamesF
Posts: 1327
Joined: Tue Mar 14, 2006 8:49 pm
Location: South Yorkshire

RE: hydraulic lever problem

Post by JamesF » Wed May 06, 2015 10:14 pm

Is the lever loose or sloppy feeling and moving towards the raised position ?

If so you can tighten it up on it's friction washer. This is under the cab between the rear axle case and the right hand fuel tank. This will tighten the lever and stop the vibration of the engine moving the lever

User avatar
tom1490
Posts: 4
Joined: Sun May 04, 2014 8:27 pm
Location: Stirlingshire

RE: hydraulic lever problem

Post by tom1490 » Fri May 08, 2015 7:01 am

I will give this a try
Thank you

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests