Problem when shifting gears on a DB 1690

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

Please note the Forum Site is not managed by David Brown Tractor Club Ltd only hosted


David Brown Tractor
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email callysmith95@outlook,com giving your username.

Amended 27/10/18

Moderator: admin

Posts: 1327
Joined: Tue Mar 14, 2006 8:49 pm
Location: South Yorkshire

Post by JamesF » Mon Mar 16, 2015 8:03 am

Did you put the pto in gear before letting the clutch pull the shaft out?

If not you will need to remove the pto housing and re set the pto selector and lick it in position by putting it in gear . The long shaft will go back into position then so you can re join the two halves of the tractor.

User avatar
Posts: 20
Joined: Fri Mar 28, 2014 9:00 pm
Location: Romania

Post by lungu » Mon Mar 16, 2015 9:14 am

Thanks for the quick response!
I'm going to take care of the clutch first(the clutch plate is worn) and when everything is ready i will remove the pto housing.

User avatar
Posts: 1648
Joined: Fri Dec 30, 2005 4:06 pm
Location: Lincolnshire

Post by DB780 » Mon Mar 16, 2015 9:17 am

You only forget to do this once, lungu.

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests