loader woes

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
saccy
Posts: 32
Joined: Tue Dec 17, 2013 9:05 pm
Location: Greenfield saddleworth

loader woes

Post by saccy » Sat Oct 18, 2014 10:10 pm

OK have a kontak valve on my 1390 its an tanco loader just plumbed up today but it bogs the engine down when in the centre position.its looking like its a closed centre valve.can anything be turned round or swapped.what's my options

User avatar
ollek
Posts: 4091
Joined: Tue Apr 10, 2012 1:20 pm
Location: South West Finland

RE: loader woes

Post by ollek » Sun Oct 19, 2014 6:33 am

I think that the best you can do is to see it there is a model plate on the valve and take the info to your local Kontak dealer. There is a possibility that some Kontak valves can be modified for closed centre or open centre hydraulics, but I am not sure. If it is an old valve I do not think you can get it to work with open centre.

User avatar
saccy
Posts: 32
Joined: Tue Dec 17, 2013 9:05 pm
Location: Greenfield saddleworth

Post by saccy » Thu Oct 23, 2014 5:49 pm

Hi just a update we managed to get sorted with the valve you just need to change the end plate one has a blank for closed pressure like on John deeres and one has a hole in for open centre that DB,s need just like to say thanks to sovereign tractors who put me on to foster sales at Beverly,and mike at Taylor bros for sending some diagrams

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 11 guests