DB/Case 995 - PTO problem

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.


David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
Posts: 9
Joined: Sat Jan 05, 2013 6:21 pm
Location: Staffordshire

DB/Case 995 - PTO problem

Post by staffstractorboy » Wed Jul 31, 2013 8:46 am

When using a an International Finger Bar mower I can only turn the PTO on and off using the clutch when the three point linkage is in the fully raised position. When I lower the mower to operating height and the clutch is depressed the PTO still revolves. Its only when I raise the mower the PTO stops. I've tried nearly every permutation of Selectamatic controls and the 3 way valve that operates the loader etc. Grateful for any help or advice.

User avatar
Posts: 2195
Joined: Fri Feb 24, 2012 10:01 pm
Location: Monmouthshire

RE: DB/Case 995 - PTO problem

Post by db2d » Wed Jul 31, 2013 9:44 am

Check the clutch adjustment. It is probably due to the transmission plate being worn down to the stage where it needs renewing. A temporary adjustment can be done by adjusting the three screws on the clutch cover assembly.
Turn in until they touch and then back off one and a half turns.

Post Reply

Who is online

Users browsing this forum: ollek and 23 guests