DB / Bristol TRU-TRAC plough

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER - Please be aware that any views expressed or advice given on the Forum are purely the opinion of the relevant poster. The David Brown Tractor Club Ltd does not endorse any of the views expressed, or advice thus given. Forum Visitors should be aware that any action they may take as a result of such information is taken at their own risk.

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 19/09/18

Moderators: Segrie61, admin

Post Reply
User avatar
Posts: 69
Joined: Mon Apr 23, 2012 11:42 am
Location: Western Australia

DB / Bristol TRU-TRAC plough

Post by willieydb » Tue Jul 02, 2013 3:44 pm

Recently came across a very rare Bristol TRU-TRAC plough.
After much e-mailing and surfing have been informed that this plough was a joint venture twix DB and Bristol mainly to suit the model 20 crawler.The plough is straight as a die but missing the wearing parts viz mould boards, skimmers and 1 disc coulter assembly. Am convinced the wearing parts are DB especially the single notch on the flat headed plough bolts.
Serial # 1252. No mention of David Brown on the plate in this case
Would enjoy some discourse on these,again, "innovative" ploughs.
Thanks to Stuart Gibbard and a David Parfitt for some very valuable and appreciated info.

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests