loader for 1210

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER -

David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
manxmac
Posts: 187
Joined: Thu Jul 15, 2010 5:49 pm
Location: United Kingdom I.O.M.

loader for 1210

Post by manxmac » Sun Mar 31, 2013 4:16 pm

Can anyone tell me if a DB HD90 loader presently on a 1490 is compatible with a 1210 Q cab 1976. Also are Q cab parts interchangeable between these models, rear panel required Thanks

Eric_T
Posts: 1408
Joined: Sat Dec 31, 2005 11:57 am
Location: North Wales

RE: loader for 1210

Post by Eric_T » Wed Apr 03, 2013 9:32 am

Im fairly sure they are not. I think the loaders themselves are different widths?

What cab parts do you mean, the 90 series cab is totally different to what would be fitted to your 1210...

User avatar
manxmac
Posts: 187
Joined: Thu Jul 15, 2010 5:49 pm
Location: United Kingdom I.O.M.

Post by manxmac » Wed Apr 03, 2013 10:07 am

Sorry, what I really meant was would the loader from a 1410 fit a 1210. Thanks

mitch
Posts: 969
Joined: Fri Apr 21, 2006 10:29 am
Location: Toowoomba Australia

Post by mitch » Wed Apr 03, 2013 10:47 am

I beleive it would, same subframe but maybe some precast holes in subframe in different spots?
non-Q 1975 1210 2wd
model# 1210/1 728931
engine# AD4/55A 26193

1975 1412 2wd
model# 1412/1 1050623
engine# 455011 120673

John_Allen
Posts: 1894
Joined: Sat Dec 31, 2005 3:59 pm
Location: Cumbria UK

Post by John_Allen » Wed Apr 03, 2013 11:20 am

The 1210 and 1410 shared the same chassis, so the loader should be a straight swap!

I seem to think there's a suitable (not DB) loader on ebay at the moment, though I doubt if you'd be able to get it on the ferry as hand luggage!

Eric_T
Posts: 1408
Joined: Sat Dec 31, 2005 11:57 am
Location: North Wales

Post by Eric_T » Wed Apr 03, 2013 11:54 am

Oh! Then, yes, it will.

And the cabs, if like for like, are very simmilar, although I think the ROPS frame itself is different.

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests