Is this a std piston

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.


David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
Posts: 142
Joined: Fri Sep 10, 2010 11:11 am
Location: weardale

Is this a std piston

Post by elfinwood » Thu Dec 06, 2012 6:46 pm

is this a std piston for a 1412?
2012-12-06 17.48.38.jpg
2012-12-06 17.48.38.jpg (163.69 KiB) Viewed 3863 times

User avatar
Posts: 1358
Joined: Mon Mar 22, 2010 5:32 pm
Location: Pennsylvania, United States of America

RE: Is this a std piston

Post by richbug » Thu Dec 06, 2012 7:14 pm

What size do they measure near the bottom ring groove?
Users: 780, 1210 Bottle Opener, 1494 4wd open station with 74L, 990, 1394, 1194 High Clearance, another 1394, 1194 LCG, 1290 with 56L, 900, 885 with LS8, 885, 1190

1200, 900 projects, 780,

Parts: 3800, 1200, 1394, 1412, 1490, 770, 885, 990SEL, Red 990I,

User avatar
Posts: 31
Joined: Mon Aug 22, 2011 12:47 pm
Location: Thwing East Yorkshire

Post by phills996 » Thu Dec 06, 2012 7:32 pm

Why, are you looking for some fresh one's ???.

User avatar
Posts: 142
Joined: Fri Sep 10, 2010 11:11 am
Location: weardale

Post by elfinwood » Thu Dec 06, 2012 7:43 pm

just after a new set of rings, want to make sure i buy the right size rings.

Posts: 299
Joined: Fri Dec 30, 2005 2:33 pm
Location: Donaghmore, County Tyrone, Northern Ireland

Post by bmcgahan » Thu Dec 06, 2012 10:12 pm

I always thought STND at end of the number stood for standard. So i presume they are standard size pistons.


User avatar
Posts: 1345
Joined: Sat Dec 22, 2007 9:07 pm
Location: Huddersfield, W Yorks. (Home of David Brown Tractors)

Post by 6-POT-PHIL » Thu Dec 06, 2012 10:26 pm

Yes its standard, Bernard's spot on.

Phil :)
1961 850 Implematic Ex DB test tractor (now sold)
1960 950 Implematic
1970 990 12 speed Selectamatic
1976 996 Loader tractor
1987 'E' 1594 4WD Hydra-Shift
1985 'C' 1694 4WD Hydra-Shift

Six in line sounds mighty fine!!

User avatar
Posts: 142
Joined: Fri Sep 10, 2010 11:11 am
Location: weardale

Post by elfinwood » Fri Dec 07, 2012 9:04 am

Thank you, that's what i thought, but best to double check with the people who know, Cheers.

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests