1210 start

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.


David Brown Tractor Club Ltd
Forum/website Disclaimer

1. This [forum/website/chat room] and the advice and opinions expressed herein is not a solution for mechanical, electrical, valuations, other problems, breakdowns or issues experienced in relation to the vehicles referenced.

2. If reliance is thought to be placed on any of the information guidance or input provided such information will be expressly confirmed as appropriate to be relied upon.

3. In the absence of any such confirmation no reliance should be suggested or inferred.

4. Members must not disclose information to 3rd parties in anticipation that reliance will be given by non-members.

5. Non-members must not purport to give advice on behalf of David Brown Tractor Club.

6. If you or someone you know is experiencing difficulties or repeated breakdowns you must seek assistance for an appropriately qualified expert who holds themselves out as such.

7. Any comments are free of charge and made or posted on an ex gratia basis. No member or non-member may advertise their professional services

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 27/10/18

Moderators: Segrie61, admin

Post Reply
User avatar
Posts: 187
Joined: Thu Jul 15, 2010 5:49 pm
Location: United Kingdom I.O.M.

1210 start

Post by manxmac » Fri May 11, 2012 10:56 am

Hi. How do you cold start a 1210. It has a Minimec pump is there a button to push. I had a Ford once and you pushed a rubber covered button in for cold start. Also is there a heater plug on a 1210. Thanks

User avatar
Posts: 261
Joined: Fri May 09, 2008 8:44 pm
Location: Nr. Downham Market. Norfolk.

RE: 1210 start

Post by thomasven » Thu May 17, 2012 10:09 pm

yep that is how we do our 1210 open the throttle a bit push the button in crank it then it will fire in 1 cylinder then2 the 3 then 3 and a half till warm think it needs an engine rebuild :(
1 880 selectamatic
1 1200 selectamatic
1 1210
1 25d (seized engine project tractor)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 16 guests