hydrashift connection to gearbox 1494

The place to discuss all matters relating to David Brown Tractors. You will need to register your user name before you can post. If you have already registered could you please make sure that your location details have been completed. Go to My Account in the Main Menu on the left, and then go into "Edit Your Information" and complete your location details. Give the Country (and State/Province if you wish) if outside the U.K. County if within the U.K. Location details helps other members if you need spares, technical advice, or the nearest practical help.

DISCLAIMER - Please be aware that any views expressed or advice given on the Forum are purely the opinion of the relevant poster. The David Brown Tractor Club Ltd does not endorse any of the views expressed, or advice thus given. Forum Visitors should be aware that any action they may take as a result of such information is taken at their own risk.

Any user inactive for more than 3 months will automatically be deactivated, please contact admin@dbtc.co.uk if you would like to be reactivated.

Please be aware that your user name and entered location can be seen by all members. We only store information you have entered which is your email address and username, your IP is also stored, we have no access to private passwords.

If you do not agree with your information being stored, please do not register an account, If you wish to unsubscribe at any time please email admin@dbtc.co.uk giving your username.

Amended 19/09/18

Moderators: Segrie61, admin

Post Reply
andybk
Posts: 21
Joined: Thu Mar 30, 2006 9:35 pm
Location: Bath somerset

hydrashift connection to gearbox 1494

Post by andybk » Thu Jul 12, 2018 9:46 am

hi all where does hydra cable go into gearbox ? my old one has worn through on bonnet mount yesterday, cant see a connection as cable is pinched between cab and engine , will i need to take right tank off or make hole through cab floor , thanks
mendip charollais sheep , for meat off grass

User avatar
DB780
Posts: 1598
Joined: Fri Dec 30, 2005 4:06 pm
Location: Lincolnshire

Re: hydrashift connection to gearbox 1494

Post by DB780 » Thu Jul 12, 2018 11:25 am

There maybe an access hole in the floor under the mat.

andybk
Posts: 21
Joined: Thu Mar 30, 2006 9:35 pm
Location: Bath somerset

Re: hydrashift connection to gearbox 1494

Post by andybk » Thu Jul 12, 2018 1:09 pm

thank no hole , going to have to cut one , any idea how hard to remove cable once i get access ?
mendip charollais sheep , for meat off grass

User avatar
DB780
Posts: 1598
Joined: Fri Dec 30, 2005 4:06 pm
Location: Lincolnshire

Re: hydrashift connection to gearbox 1494

Post by DB780 » Thu Jul 12, 2018 6:52 pm

Just remove the outer cable clamp and the split pin from the end of the inner wire.

Post Reply

Who is online

Users browsing this forum: ardiel, Google [Bot] and 10 guests