David Brown Tractor Club Forum

im not sure what on a 1190 but i think a lot of the top covers are the same, suppose they are similar to a 885?

these are two plates i have, i think they are both home made , hopefully someone else can shed some light on this but maybe the orange one is just for a return? im pretty certain the black one is a power beyond set up http://i306.photobucket.com/albums/nn261/jimc1390/DSCF0326.jpg and the underneath....

simon i had a look in my book today, 915556 is the equivilent of 906753 in a 995 etc, ive never noticed before but i think the on a 995 etc the driver gear is shiftable where as the driven gear on a 12 is shiftable, thats how it looks to me, both set up are 44/38 teeth for high and low, is the drive...

i thought us spec tractors had remotes on providing double acting outlets all ready? if it hasnt i think it would have a 3 way valve like a uk spec tractor, whilst sitting on tractor behind your left leg is there a handle that moves sideways or a collection of 3 knobs perhaps? you will be able to ta...

it must be a common occurance, must be a simple way around it

that extra gear shouldnt affect anything, although it might be the only 1200 with a rear vacuum switch

http://www.davidbrownsupport.com/ lots of helpful info here

basically two hydraulic clutch packs with epicyclic reductions mounted to them, without preasure the drive goes through reductions, hydraulic preasure to the clutch packs locks up the drive to 1:1 , different sequences of the 2 packs will give you 4 speeds, hexashift is a good system the soft wear s...

ill take some pics later of a few set ups i have, they are the standard top plates with holes drilled and tapped in the right places

text me simon as i have a new phone and lost all numbers, i wil have a look in my book at work morrow and text you my number if someone doesnt come up on here

did you ever have the tail wagging problem?

what gearbox was living inside those 1200's? would i be right in thinking twas a 135 box?

were they ever used a platform machine? jcb fastrac with 4ws doesnt seem that far away in terms of concept

you obviously have a soft spot for them then david

i have seen the loader controls mounted in the same place then the hydra shift lever taken off and turned 180 degrees so it hangs down under loader controls