Search found 111 matches

by 1952CROPMASTER
Wed Apr 11, 2018 8:59 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

If you send me a PM with your home email address i could send you some Pictures on how to connect the Loader to the P-B-Plate, i can't do it on here because my pictures are to big & i haven't got a clue how to make them smaller, i have tried but screw up, I'm no computer whiz,
by 1952CROPMASTER
Wed Apr 11, 2018 7:44 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

Hi Travis;
Yes you need a Gasket when you remove the screen to be washed, your local CASE-IH Dealer should have one K906764 if not SPAREX USA Aftermarket Parts carry them under Part # S.57964 & most Ag Dealers sell Sparex Parts.
by 1952CROPMASTER
Wed Apr 11, 2018 2:29 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

That P-B-Block is the correct one, there is no Gasket used in this area Just oil rings make sure they are OK and not damaged when you remove the top cover if you find one damaged replace them all, Oil; don't just use Hyd Oil, if you can't find TDH just use 75-80 gear oil, 5000 PSI Hose sorry, i mean...
by 1952CROPMASTER
Wed Apr 11, 2018 1:38 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

Do you not have a Walmart in your area? the oil that i suggested is TDH from Walmart, that's what i use in my BD's Can you download a picture of the Power-Beyond-Block just to make sure it's the correct one, if not i may be able to get one for $100.00 Are you sure that you need two sets of Remotes, ...
by 1952CROPMASTER
Wed Apr 11, 2018 1:32 am
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

First i would drain all the Hyd/Trans oil & see what the condition the filter (gauze) is in, if it's very dirty wash it out in Diesel or whatever you have, then put about 5Gal's of Diesel into the Transmission and as Ollek said take it for drive over as rough ground as you can stand for about 10 - 1...
by 1952CROPMASTER
Tue Apr 10, 2018 1:49 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 7476

Re: 990 Selectamatic hydraulic problems

Hi Travis; Just visit your local Walmart store & pick up two 5gal pails of TDH Oil (Transmission, Differential Hydraulic) before you do anything, do what Ollek suggested, flush out the Hyd/Transmission with Diesel, It's pretty near impossible to get all the old Oil & Water out of the Transmission ar...
by 1952CROPMASTER
Tue Mar 20, 2018 12:52 am
Forum: DBTC Forum
Topic: Handbrake repair DB 880 selectamatic
Replies: 8
Views: 2506

Re: Handbrake repair DB 880 selectamatic

Try tapping the Pawl back into the housing against the spring, if it moves, it will allow you to get some penetrating oil into the hole & it may loosen up some, if that don't work drill a small hole under the Housing in line with the Paul's cavity, make sure you are behind the Pawl It's app 1" long,...
by 1952CROPMASTER
Sat Mar 03, 2018 5:54 pm
Forum: DBTC Forum
Topic: Overide control lever.
Replies: 9
Views: 2118

Re: Overide control lever.

That leaves you with only two options remove the Rollbar or the Ramshaft, is it the override assembly that's seized or is it the linkage?, when you move the 3-P-H Arms up & down by hand does the overide leaver move up & down with it or stay still.
by 1952CROPMASTER
Sat Mar 03, 2018 1:35 pm
Forum: DBTC Forum
Topic: Overide control lever.
Replies: 9
Views: 2118

Re: Overide control lever.

you can remove the complete override assembly by removing the two (2) setscrews at the end of the Ramshaft,
by 1952CROPMASTER
Thu Mar 01, 2018 11:54 pm
Forum: DBTC Forum
Topic: 900 steering box
Replies: 8
Views: 2207

Re: 900 steering box

Hi Gard;
I may have a used 950 Steering box, could you send me some up close pictures of the 900 S/Box,
by 1952CROPMASTER
Wed Feb 21, 2018 1:52 pm
Forum: DBTC Forum
Topic: Trouble with David Brown 885 Lift
Replies: 9
Views: 2048

Re: Trouble with David Brown 885 Lift

Yes it does. Never tried them, but when lever is moved back or forward it pulls engine down some. No pace for fluid to go I guess. I was thinking about that last night. Just not sure how to route some hoses. Would a person use the existing Ram and route hoses? I am in Texas. Yes you use the same 3-...
by 1952CROPMASTER
Tue Feb 20, 2018 8:09 pm
Forum: DBTC Forum
Topic: Trouble with David Brown 885 Lift
Replies: 9
Views: 2048

Re: Trouble with David Brown 885 Lift

Hi John;
I hate to see you give up, is your 885 equipped with rear Remotes? if it is, there is a simple fix, if you only need lift-Hold & Drop
What part of the US are you from?
by 1952CROPMASTER
Sat Feb 17, 2018 7:11 pm
Forum: DBTC Forum
Topic: Trouble with David Brown 885 Lift
Replies: 9
Views: 2048

Re: Trouble with David Brown 885 Lift

With the rear cover off & you pulled the Quadrant leaver back all the way, that flow of oil should stop, if it don't, it's properly the By-Pass-Valve (That's the one next to the Fender) not seating properly, remove the plunger then remove the brass screw inside the plunger, you should see a small wa...
by 1952CROPMASTER
Wed Feb 07, 2018 1:55 pm
Forum: DBTC Forum
Topic: Power steering pump
Replies: 3
Views: 1239

Re: Power steering pump

Yes you have to remove the Pump, the top setscrew is a little Tricky to get out, it can be done & has been done, you may have to modifie your wrench some,
by 1952CROPMASTER
Tue Feb 06, 2018 1:37 pm
Forum: DBTC Forum
Topic: Power steering pump
Replies: 3
Views: 1239

Re: Power steering pump

If it's working OK it may only need a seal kit to repair it, Google SPAREX USA & under DB Steering & Front Axle you will find Pumps & Seal Kits