Search found 94 matches

by 1952CROPMASTER
Sat Aug 04, 2018 12:05 am
Forum: DBTC Forum
Topic: 990 selectamatic hydraulic oil filter
Replies: 19
Views: 2577

Re: 990 selectamatic hydraulic oil filter

Would this engine oil filter S.57751 fit a Cropmaster?
by 1952CROPMASTER
Fri Jun 15, 2018 3:30 pm
Forum: DBTC Forum
Topic: DB 880E LS8 loader install issues
Replies: 3
Views: 671

Re: DB 880E LS8 loader install issues

Hi S.V,
P.M me with your phone # & i will call you back, I can't seem to get a PM to you & I know It's the operator not the computer
Thank you
Cropmaster
by 1952CROPMASTER
Fri Jun 15, 2018 2:53 am
Forum: DBTC Forum
Topic: DB 880E LS8 loader install issues
Replies: 3
Views: 671

Re: DB 880E LS8 loader install issues

Hi S.V. You have to remove one of the Hyd fittings from the larger pipe in order to pass it through the Clutch Bell Housing, that pipe acts as a support & also supplies oil to the lift Cyl's, when you have it through the Bell Housing there is two special half moon pipes that has to be installed as w...
by 1952CROPMASTER
Wed Jun 13, 2018 1:25 am
Forum: DBTC Forum
Topic: Adding external hydraulics to a Selectamatic
Replies: 24
Views: 6426

Re: Adding external hydraulics to a Selectamatic

Hi Lofty;
You said a DB Stack valve sold for $630.00 Canadian on E-Bay, i have one, complete with base plate that i would sell for $300.00 & if you needed the Power-Beyond-Pate for the top of the Stack Valve it would be $80.00 extra.
by 1952CROPMASTER
Mon May 28, 2018 9:27 pm
Forum: DBTC Forum
Topic: 885 overheating
Replies: 23
Views: 3513

Re: 885 overheating

Try white vinegar, the one that you get at your local Grocery store, i find it works the best, don't leave it over 24Hrs,
by 1952CROPMASTER
Sun May 13, 2018 1:26 pm
Forum: DBTC Forum
Topic: Air in the fuel line
Replies: 5
Views: 1025

Re: Air in the fuel line

you said this only happens when you are going up a Hill, fill the fuel tank all the way to the top & see what happens, if it works OK, then i would check the pipe inside the Tank, also check the vent on top of the filler cap,
by 1952CROPMASTER
Wed May 09, 2018 2:30 am
Forum: DBTC Forum
Topic: '66 990 Selectamatic starter 26133Q?
Replies: 10
Views: 1963

Re: '66 990 Selectamatic starter 26133Q?

If you can get a new Starter for $200.00 get it, It's going to cost you a lot more to have the old one rebuilt & you still have a old Starter, the new ones are a lot shorter & more compact, you usually get 12Mts Warranty as well.
by 1952CROPMASTER
Wed May 09, 2018 2:23 am
Forum: DBTC Forum
Topic: 990 Fuel Pump
Replies: 18
Views: 3153

Re: 990 Fuel Pump

Google SPAREX USA & enter DB Part # K909944 or K944997 & both #'S will give you the SPAREX # S.63034, most Farm Equipment Dealers deal with sparex or another aftermarket parts,
by 1952CROPMASTER
Fri May 04, 2018 12:47 am
Forum: DBTC Forum
Topic: No lift on 900 livedrive
Replies: 40
Views: 6020

Re: No lift on 900 livedrive

Assemble the rotor-pack and slide as assembly into the pump body, when it's in pace take the front cover and put every-other setscrew and tighten same, then remove the setscrew, and check the gap between the pump body & front cover you should have app 0.020 0.030 using regular feeler-gauges, if you ...
by 1952CROPMASTER
Wed May 02, 2018 6:20 pm
Forum: DBTC Forum
Topic: No lift on 900 livedrive
Replies: 40
Views: 6020

Re: No lift on 900 livedrive

Get yourself a block of hardwood and keep banging the pump with the open side down against the hardwood, they should start to move enough that you may be able too get a wooden dowel to knock them out, make sure you put them back in the same order as you removed them
Good luck
by 1952CROPMASTER
Mon Apr 30, 2018 5:53 pm
Forum: DBTC Forum
Topic: No lift on 900 livedrive
Replies: 40
Views: 6020

Re: No lift on 900 livedrive

Hi Gard; Remove the two brass bearings that's still showing in your picture & when you do, you should find two oil rings, make sure you replace them, take all the old oil rings that you are replacing to your local Hyd shop, they should be able to fix you up with the correct size and a better quality...
by 1952CROPMASTER
Mon Apr 30, 2018 1:21 am
Forum: DBTC Forum
Topic: correct fitting of clutch discs
Replies: 5
Views: 1114

Re: correct fitting of clutch discs

The long center of the PTO Disc goes towards the Flywheel & If you look at the center of the Main Clutch Disc, it should say, Flywheel side, if it don't look at the old disc, the original disc were always marked.
by 1952CROPMASTER
Wed Apr 18, 2018 1:51 pm
Forum: DBTC Forum
Topic: No lift on 900 livedrive
Replies: 40
Views: 6020

Re: No lift on 900 livedrive

The 880 selectamatic will out perform the 990 Imp or sel, as far as I'm concern the 880 Sel is one of the best Tractors that David Brown ever made
by 1952CROPMASTER
Wed Apr 11, 2018 8:59 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 5094

Re: 990 Selectamatic hydraulic problems

If you send me a PM with your home email address i could send you some Pictures on how to connect the Loader to the P-B-Plate, i can't do it on here because my pictures are to big & i haven't got a clue how to make them smaller, i have tried but screw up, I'm no computer whiz,
by 1952CROPMASTER
Wed Apr 11, 2018 7:44 pm
Forum: DBTC Forum
Topic: 990 Selectamatic hydraulic problems
Replies: 35
Views: 5094

Re: 990 Selectamatic hydraulic problems

Hi Travis;
Yes you need a Gasket when you remove the screen to be washed, your local CASE-IH Dealer should have one K906764 if not SPAREX USA Aftermarket Parts carry them under Part # S.57964 & most Ag Dealers sell Sparex Parts.