Search found 78 matches

by dbiow
Sat Nov 02, 2019 4:34 pm
Forum: DBTC Forum
Topic: LF9 loader for sale
Replies: 1
Views: 424

Re: LF9 loader for sale

Happy if someone only wants bits from it.

Only after a beer for it to cover the time of loading it up just seems a shame to scrap it but unfortunately I need the space for other things
by dbiow
Fri Nov 01, 2019 8:45 pm
Forum: DBTC Forum
Topic: 4600 selectomatic
Replies: 22
Views: 1469

Re: 4600 selectomatic

If you get really stuck resizing pics I email them to myself on iPhone and it gives the option to make smaller to save data once emailed smaller I then save to fone from the recived email and upload!

But I am a Luddite that hasn’t really got a clue with modern stuff :lol:
by dbiow
Fri Nov 01, 2019 11:54 am
Forum: DBTC Forum
Topic: LF9 loader for sale
Replies: 1
Views: 424

LF9 loader for sale

I’ve got a complete fl9 (power tip) loader sat here in good-reasonable condition doing nothing other that gathering dust. The rams are all in good used condition but have been sitting a couple of years. Some rust in the end cross beam and muck fork, that’s also missing most of its tines. The loader ...
by dbiow
Fri Oct 25, 2019 11:59 pm
Forum: DBTC Forum
Topic: Loader - Replacement Rams
Replies: 4
Views: 622

Re: Loader - Replacement Rams

Which
H model loader do you have? There may be some good second hand ones around. If it’s any help I have a set from a 995 tractor in good condition, I can check the loader model for you if there if interest?
by dbiow
Tue Sep 24, 2019 8:28 pm
Forum: DBTC Forum
Topic: Spring from gearbox
Replies: 4
Views: 577

Re: Spring from gearbox

My 885 selects the gears with no effort, just a very occasional crunch on second. My uncle had a 995 that had seen a lot of hard loader work the gearbox gave up eventually, that used to jump the selectors if you went diagonally with the geAr laver and try to get two gears at once :( if you only had ...
by dbiow
Tue Sep 24, 2019 2:39 pm
Forum: DBTC Forum
Topic: Spring from gearbox
Replies: 4
Views: 577

Re: Spring from gearbox

Thank you kindly Ollek.

That would explain the occasional crunch from second then :lol: the tractor has done this for the last 20 plus years so I’m surprised the spring has taken this long to come out :shock:

I won’t worry about it at this time due to how few hours it does.
by dbiow
Tue Sep 24, 2019 11:50 am
Forum: DBTC Forum
Topic: Spring from gearbox
Replies: 4
Views: 577

Spring from gearbox

Hello again all. I’ve just changed the gearbox oil in my 885 (79 q cab) in the bottom of the filter housing I’ve found a wire (poss a spring clip?) there was also a small amount of sludge on the top of the filter with a few small white bits of nylon/plastic. I’ve tried to get pics of them as best I ...
by dbiow
Sun Aug 11, 2019 11:22 am
Forum: DBTC Forum
Topic: 885 & 995 loaders
Replies: 0
Views: 2573

885 & 995 loaders

Hello folks, I’ve not been here for a while. I have got a 79 885 with a LQ8 trip loader on and a LF9 power loader from a 1972 995 sat in the shed. I’m wanting to convert my trip loader to a power loader so I can use a bale spike and tines (not built yet) Is there any reason I can’t put the 995 loade...
by dbiow
Wed Mar 13, 2019 8:42 pm
Forum: DBTC Forum
Topic: Flushing out the block
Replies: 9
Views: 1495

Re: Flushing out the block

That’s a good idea re the air, I will have ask around for a tyre fitters water ballasting valve. Thanks all
by dbiow
Tue Mar 12, 2019 8:40 pm
Forum: DBTC Forum
Topic: The grand tour
Replies: 1
Views: 559

Re: The grand tour

I spotted that as well, no idea as to answering your questions tho :lol:
by dbiow
Sun Mar 10, 2019 10:12 pm
Forum: DBTC Forum
Topic: 885 Rev Counter Cable Replacement
Replies: 4
Views: 862

Re: 885 Rev Counter Cable Replacement

If you remove the steering wheel and then the screws around the side of the black dash top you can lift the dash top enough to put your hand through and undo the cable from the back of the Rev counter. The other end I seem to remember being self explanatory to undo but it’s a while since I’ve done s...
by dbiow
Sun Mar 10, 2019 7:02 am
Forum: DBTC Forum
Topic: Flushing out the block
Replies: 9
Views: 1495

Re: Flushing out the block

Thank you all. I will fetch the drain plug out when I get a min to get back to it and see what I can get out.
by dbiow
Fri Mar 08, 2019 9:04 pm
Forum: DBTC Forum
Topic: Flushing out the block
Replies: 9
Views: 1495

Flushing out the block

Evening all. I’ve just had the radiator record for my 25d. The rad man said a fair few or the cores were blocked when he stripped it down so I’m thinking it wouldn’t be a bad thing to flush the block out before refitting the radiator. What’s the best way to do this? Can I just stick the hose in the ...
by dbiow
Sat Feb 16, 2019 5:42 pm
Forum: DBTC Forum
Topic: 885 PTO Engagement
Replies: 12
Views: 1816

Re: 885 PTO Engagement

Be aware that if the clutch requires adjusting as described it indicates that the TRANSMISSION PLATE has worn down to approximately its minimum thickness and requires replacing. If adjusted the plate will continue to wear down through the rivets until it destructs, usually requiring a complete new,...
by dbiow
Sat Feb 16, 2019 10:41 am
Forum: DBTC Forum
Topic: 885 PTO Engagement
Replies: 12
Views: 1816

Re: 885 PTO Engagement

The clutch is 2 stage. The pto clutch is adjusted on the flywheel through a inspection hole in the bottom of the bell housing, you will need a Allen key and spanner to do so but I can’t remember the tolerance off the top of my head. It’s not a difficult job to do.