Search found 1525 matches

by joeproctor
Mon Oct 16, 2017 7:05 am
Forum: DBTC Forum
Topic: multi spline steering wheel to fit 950
Replies: 5
Views: 2053

Re: multi spline steering wheel to fit 950

i have a few of these in stock, but this is not the one i need,it looks like the later selectamatic steering wheel but has the fine spline!

yes its good to be back thanks!
by joeproctor
Sun Oct 15, 2017 8:54 am
Forum: DBTC Forum
Topic: multi spline steering wheel to fit 950
Replies: 5
Views: 2053

multi spline steering wheel to fit 950

is there a supplier out there that can supply this?
by joeproctor
Sat Oct 14, 2017 8:00 am
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

You do not need to have a single acting Cessna valve fitted. You can make your double acting Cessna valve single acting by simply connecting one of the two hoses from the valve to the return plug on top of the rear axle on the left hand side. The plug can be seen in front of the lift arm in you lat...
by joeproctor
Fri Oct 13, 2017 9:54 pm
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

if you could get a single acting cessna valve to add on to the two one and pipe across to a banjo bolts 'cossyrec ' describes the lift will work and also the oil returned to the correct place to lubricate the gearbox perfick!
by joeproctor
Wed Oct 11, 2017 10:46 pm
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

top picture shows that you have a db valve fitted not sure whether it is single or double acting! bottom picture shows a diversion block,oil comes from the control valve and transfers to the lift ram cylinder, under the valve block(cesna valve) is three pipes,one from the pump one to the control val...
by joeproctor
Thu Oct 05, 2017 3:39 pm
Forum: DBTC Forum
Topic: DB 996 Hydraulics
Replies: 12
Views: 3090

Re: DB 996 Hydraulics

do the link arms work?
by joeproctor
Mon Oct 02, 2017 10:31 pm
Forum: DBTC Forum
Topic: No power to PTO of Hydraulics after Clutch replacement
Replies: 49
Views: 9104

Re: No power to PTO of Hydraulics after Clutch replacement

did you source this plate?
by joeproctor
Sat Sep 30, 2017 10:21 pm
Forum: DBTC Forum
Topic: Cropmaster (play in steering)
Replies: 12
Views: 3572

Re: Cropmaster (play in steering)

The steering screw and nut is not poor engineering, it was the standard, and only known, system at the time and the system was used in most vehicles (tractors, cars and trucks). The system was used for mechanical steering in nearly all tractors, regardless of brand, until the fully hydraulic steeri...
by joeproctor
Sat Sep 30, 2017 7:04 pm
Forum: DBTC Forum
Topic: Cropmaster (play in steering)
Replies: 12
Views: 3572

Re: Cropmaster (play in steering)

most of the play is in the screw ,poor engineering ,the next move up is the recirculating ball as fitted to post 60s tractors,on my own cropmaster i have fitted power assisted steering,not quite right but has got rid of the hard steering and creeking knuckle joint, looks like it could have been a db...
by joeproctor
Sat Sep 30, 2017 6:55 pm
Forum: DBTC Forum
Topic: *HELP* Purchase of 880 Implamatic 3 cyl 1964
Replies: 1
Views: 803

Re: *HELP* Purchase of 880 Implamatic 3 cyl 1964

yes it is quite capable of all those jobs,it has a very good engine and a simple hydraulic system,good tractor ,
by joeproctor
Sat Sep 30, 2017 9:38 am
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

aubrey post a picture of the valve arrangement on your tractor.
by joeproctor
Fri Sep 29, 2017 4:26 pm
Forum: DBTC Forum
Topic: No power to PTO of Hydraulics after Clutch replacement
Replies: 49
Views: 9104

Re: No power to PTO of Hydraulics after Clutch replacement

hmmm thats handy,i maybe able to source one,it has been discontinued by sparex, and others
by joeproctor
Fri Sep 29, 2017 3:50 pm
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

on cossyrec's photo of the three way tap where the pipe connection is,not all taps have this position so that is where the drilling and tapping comes in!
by joeproctor
Fri Sep 29, 2017 3:32 pm
Forum: DBTC Forum
Topic: No power to PTO of Hydraulics after Clutch replacement
Replies: 49
Views: 9104

Re: No power to PTO of Hydraulics after Clutch replacement

have you kept the old pto plate.
by joeproctor
Fri Sep 22, 2017 5:56 pm
Forum: DBTC Forum
Topic: Anyone replaced/simplified Selectamatic hydraulics?
Replies: 62
Views: 14069

Re: Anyone replaced/simplified Selectamatic hydraulics?

i think i still have an 880 with this set up still on it! will try and get some photos for you,