Search found 789 matches

by jazo
Fri Sep 14, 2018 7:39 pm
Forum: DBTC Forum
Topic: 1412 Adjustable track rods
Replies: 7
Views: 1417

Re: 1421 Adjustable track rods

Hi, widening the front track will not add to stability until your on the axle stop with a rear wheel in the air! It's the rear wheels that give you stability. As it has a loader I wouldn't widen it to much but that's me personally. But back to your question, have you tried hammering around the pipe ...
by jazo
Tue Sep 04, 2018 7:45 pm
Forum: DBTC Forum
Topic: 990 brake adjustment, pad thickness
Replies: 4
Views: 1307

Re: 990 brake adjustment, pad thickness

Hi. On the later model tractors that I have seen there are no backing nuts on the adjusters so the front lock nuts have the full thread available
by jazo
Sun Aug 26, 2018 7:56 am
Forum: DBTC Forum
Topic: 1210/990 parts
Replies: 2
Views: 957

Re: 1210/990 parts

Hi the brakes are wider on the 12 series so the housing and the drive shaft with 10 teeth will be longer.
by jazo
Sun Aug 19, 2018 8:52 am
Forum: DBTC Forum
Topic: 770 Tractormeter
Replies: 15
Views: 3906

Re: 770 Tractormeter

Are you just trying to get a lower hour tractor scooby???
by jazo
Fri Aug 17, 2018 4:38 am
Forum: DBTC Forum
Topic: New 1394 owner, with plenty of fettling required
Replies: 20
Views: 4267

Re: New 1394 owner, with plenty of fettling required

There are a few turboed. You just need to drill and tap oil return port. They are the same spec as turbo versions except for the fueling
by jazo
Fri Aug 17, 2018 4:36 am
Forum: DBTC Forum
Topic: hydraulic david brown
Replies: 25
Views: 5068

Re: hydraulic david brown

No using the rear port in your picture will give you nothing. You have to split the flow from the centre pipe and return to the rear pipe under the cover
by jazo
Thu Aug 16, 2018 6:08 am
Forum: DBTC Forum
Topic: hydraulic david brown
Replies: 25
Views: 5068

Re: hydraulic david brown

Depends on what you're wanting to achieve? You have to remove that plate and fit a remote valve or a power beyond plate to get flow from there
by jazo
Thu Aug 16, 2018 6:04 am
Forum: DBTC Forum
Topic: New 1394 owner, with plenty of fettling required
Replies: 20
Views: 4267

Re: New 1394 owner, with plenty of fettling required

Yes they have slightly lower compression as stated but also the top piston ring groove is steel lined. 1594s come with turbo pistons already in them.
by jazo
Tue Jul 17, 2018 10:26 am
Forum: DBTC Forum
Topic: 1490 Grinding Noise on PTO Engagement
Replies: 6
Views: 1606

Re: 1490 Grinding Noise on PTO Engagement

Hi. I have always had the same issue on my 1394. I think it possibly has oil residue and maybe the spline might be dry causing it to stick?
by jazo
Wed Jun 20, 2018 7:51 am
Forum: DBTC Forum
Topic: Many DB tractors plus many others up for auction soon here in Queensland
Replies: 9
Views: 2753

Re: Many DB tractors plus many others up for auction soon here in Queensland

Db2d the price is at the bottom of the picture, but I think it should read $15000 aus / 8000gbp
by jazo
Wed Jun 20, 2018 6:08 am
Forum: DBTC Forum
Topic: 1212 Front Loaders.
Replies: 24
Views: 5276

Re: 1212 Front Loaders.

Bedwards you don't know what you're missing out on!!
by jazo
Tue Jun 19, 2018 7:50 am
Forum: DBTC Forum
Topic: 1212 Front Loaders.
Replies: 24
Views: 5276

Re: 1212 Front Loaders.

Hi it's fine to do but you only have one reverse and 3 forward gears to choose from when starting off as you have to have the hydrashift in 1st. Most hydrashift tractors in new Zealand have loaders fitted! Use it as it should be and it will be fine. Sorry can't answer your question though!
by jazo
Fri Jun 08, 2018 8:33 am
Forum: DBTC Forum
Topic: Cleaning cooling system
Replies: 2
Views: 931

Re: Cleaning cooling system

Hi. If its rusty I use white vinegar, I leave it in for a couple days then flush. Repeat if necessary. Use about 4 litres of it and the rest water.
by jazo
Fri Jun 01, 2018 9:14 pm
Forum: DBTC Forum
Topic: 1490. Two versions of hydraulic strainer?
Replies: 4
Views: 1124

Re: 1490. Two versions of hydraulic strainer?

I think it was the 1210 and the like models had paper and gauze filters. I know there isn't much room but if you can get a bar on each side of the filter and have 2 people pushing on it equally it will certainly help. You will need the powerbar that slides through the head type, sorry don't know the...
by jazo
Tue May 29, 2018 7:48 am
Forum: DBTC Forum
Topic: Rear arms not dropping low
Replies: 8
Views: 1693

Re: Rear arms not dropping low

Hi try removing the cover behind your right foot that has the lowering speed control knob and there is a 1/2" size nut in there. Unwind when it's running might only take a couple turns to lower correctly