Search found 88 matches
i will try and get some pics of these tractors but our 990s had 600x19s on the front and 12.4 x36 rears on and 13.6 36 on was a early selectamatic and was a qcab that had its fronts changed later for 7.50 16s because i can just remember going for them with my dad in the mid eighties to russells a da...
1t only took a day or so to strip down but that is the easy bit.The gearbox had so very worn gears and shafts and when you drove it it knocked it had a hard life it had done a lot of ploughing its 12 speed with the delux seat and it was on 13.6 x38 tyres they look if they have been on since it was n...
well i have done it again gave a man a daft bid for a 1210 vq cab and loader with a tight engine because its been stood for a year with water in the exhaust and he,s bitten my hand off oh dear i think im a dead man
- Sun Apr 28, 2013 2:43 pm
- Forum: DBTC Forum
- Topic: 1494 loader quick release headstock ID?
- Replies: 6
- Views: 4892
now tc you need to double check before you get brackets i would try to find someone local with a loader on old quickie no3s on and try an attachment on first if not take some measurements and i will try and get some info for you so you get the right brackets
once the tractor is split and the first time you have taken one out about 1 to 2 hours also when you split the tractor you will have to remove the front cab mounting bolts and jack and prop the cab up at the front to let the mountings come with the engine main frame