Search found 52 matches

by Patrick98
Sat Aug 24, 2019 6:14 pm
Forum: DBTC Forum
Topic: Temperature
Replies: 4
Views: 400

Re: Temperature

The tractor is perfectly OK if the temperature in the top of the radiator is 65 degrees Centigrade. after a low horsepower drive. About the lead to the temperature sender, remove the lead and press the connector with some pliers to make a tighter fit to the sender. By the way, you do not get any te...
by Patrick98
Sat Aug 24, 2019 5:03 pm
Forum: DBTC Forum
Topic: Temperature
Replies: 4
Views: 400

Re: Temperature

Patrick, I think you are lost. There is no leads going to the thermostat and the thermostat can not be "jumping around" if it is correctly fitted, as it is inside the thermostat housing. There is a lead going to the temperature sender, that is mounted into the thermostat housing and this sender sen...
by Patrick98
Sat Aug 24, 2019 2:31 pm
Forum: DBTC Forum
Topic: Temperature
Replies: 4
Views: 400

Temperature

Ino it's probably a stupid question but I have recently replaced my tractors water pump and radiator and all is good.. no leaks etc.. my thermostat works but it jumps about and I found the the wiring is lose.. I have a 1210 which is fairly reliable and I have got 65 degree cent from the cap of the r...
by Patrick98
Sat Apr 13, 2019 10:01 pm
Forum: DBTC Forum
Topic: Sparks
Replies: 5
Views: 680

Re: Sparks

Very generally speaking here, no specific knowledge of your specific tractor... Diesel engines need good compression to create the heat needed to ignite the fuel, when starting them from cold. They also need proper fuel delivery. Bad starters need compression check and fuel delivery check. The latt...
by Patrick98
Sat Apr 13, 2019 7:33 pm
Forum: DBTC Forum
Topic: Sparks
Replies: 5
Views: 680

Sparks

Hello people.. tell me if I'm an nuisance.. I have my coolant system sorted and when waiting on my radiator to be referbed I took the injectors out and noticed a lot of suit build up as well as oil on the injector hole walls.. once testing the coolant system I had the tractor running and it was hard...
by Patrick98
Sun Apr 07, 2019 11:32 am
Forum: DBTC Forum
Topic: Coolant
Replies: 9
Views: 1067

Coolant

Just wondering what is the ratio of coolant to water for a DB 996 radiator and what is the capacity??
by Patrick98
Sat Apr 06, 2019 11:11 pm
Forum: DBTC Forum
Topic: New radiator
Replies: 4
Views: 795

Re: New radiator

That price is quite reasonable for a re-core - certainly a lot cheaper than I've ever had one done in my area. I've no experience of the cheap ones that are available for David Browns but unless the cost of a re-core was very high I would choose that option over getting a radiator of unknown qualit...
by Patrick98
Tue Mar 26, 2019 6:54 pm
Forum: DBTC Forum
Topic: New radiator
Replies: 4
Views: 795

New radiator

Hello all. My radiator belonging to my 996 has a bad core and is needing replaced. I have the radiator at a radiator specialists and they are quoting £190 for a new core. I was tempted to buy a new one but was told that refurbishing the old rad would be better as the 'bowls' (don't know what they ar...
by Patrick98
Sat Mar 23, 2019 2:50 pm
Forum: DBTC Forum
Topic: Compression test
Replies: 5
Views: 920

Compression test

Hello I have a topic up already about compression testing but im having trouble finding an adapter to fit into the injector holes.. I cant find anything online.. all that comes up is glow plugs adapters.. I had a kit that a mate give me to try and nothing fitted. I have reconditioned injectors ready...
by Patrick98
Fri Mar 22, 2019 6:54 pm
Forum: DBTC Forum
Topic: Referb injectors
Replies: 5
Views: 884

Re: Referb injectors

Sorry for not being clear there.. I took the forth out, eventually.. took a bit of work.. again they all had a skinning of oil around them.
by Patrick98
Sat Mar 16, 2019 9:31 am
Forum: DBTC Forum
Topic: Referb injectors
Replies: 5
Views: 884

Re: Referb injectors

The old injectors had carbon build on the tip but I don't no how long they were in there?? One injector was fairly hard to take out! The other two slid out handy enough.
by Patrick98
Fri Mar 15, 2019 7:45 pm
Forum: DBTC Forum
Topic: Referb injectors
Replies: 5
Views: 884

Referb injectors

Hello again.. I had a few questions in the past relating to starting issues that I have with the DB 996. I just want to tell you all that I was going to compression test on the 996 but the compression test kit that I had didn't have the correct adapter for the injector holes.. I'll keep you updated ...
by Patrick98
Wed Feb 27, 2019 8:55 pm
Forum: DBTC Forum
Topic: Radiator mounts
Replies: 5
Views: 844

Radiator mounts

Hello I am ready to put the radiator back on to the 996 and I need new rubber mounts that absorb the shock from the radiator but I can't seem to find them online etc.. can anyone point me in the direction and also what is the proper name for them?? Thanks..
by Patrick98
Mon Feb 18, 2019 9:10 am
Forum: DBTC Forum
Topic: Compression test
Replies: 3
Views: 713

Re: Compression test

DB780 wrote:
Mon Feb 18, 2019 8:41 am
I take them all out then test each one. Do a dry test then squirt a little oil into the bore and re-test. You will find it better to rig a pipe up for the returns line, saves getting covered in diesel!
What do you mean by right a pipe up for the return lines?? Thanks.
by Patrick98
Mon Feb 18, 2019 12:14 am
Forum: DBTC Forum
Topic: Compression test
Replies: 3
Views: 713

Compression test

Hello never done a compression test before on a diesel before just wondering how to go about doing it.. ie. Do I take all of the injectors out and test each one individually or take one out at a time and put in injectors as I finish with each.. some tips will help.. thanks