Search found 56 matches

by ScottUSA
Mon Jun 17, 2019 9:31 pm
Forum: DBTC Forum
Topic: Removing 885 transmission
Replies: 5
Views: 105

Re: Removing 885 transmission

The transmission can be left attached to the back end as it is rolled away from the transmission housing/gearbox casing? Am I understanding you correctly? The threaded hole, is it a dedicated hole for this purpose or one of the trans cover bolt holes? I'll look for it next time the tractor is used. ...
by ScottUSA
Mon Jun 17, 2019 6:23 pm
Forum: DBTC Forum
Topic: Removing 885 transmission
Replies: 5
Views: 105

Removing 885 transmission

1976 DB885 leaking oil between the trans and diff. Ample silicone suggests someone has been in there before. This repair will be undertaken this fall unless the leak get too much worse. Along with the leak repair is a worn shift rail socket for 1st/rev that needs to be replaced. Read through the fac...
by ScottUSA
Mon Feb 18, 2019 6:47 pm
Forum: DBTC Forum
Topic: Venting of 885 Final Drives
Replies: 3
Views: 358

Venting of 885 Final Drives

I call them Final Drives but think they may be referred to as Drop Boxes, Reducing or Reduction Units. A quick search didn't help and my lunch hour is about up so… It's Final Drive for now. When cleaning both final drives while replacing the tractors brakes, one unit was accidently left resting upsi...
by ScottUSA
Mon Jan 14, 2019 9:32 pm
Forum: DBTC Forum
Topic: Replacing DB885 Axle Housing Seals
Replies: 8
Views: 669

Re: Replacing DB885 Axle Housing Seals

Gard, Piedmont Fastener in Mooresville, NC. Be advised, they hit me for $8 for two 1/4"-26 X 1" bolts. I had plenty to say about it but they never offered why so expensive. Look for British bike or car restorers. Found one in Florida with a stock of Brit fasteners last spring after I dropped a BSF n...
by ScottUSA
Sun Jan 13, 2019 11:41 pm
Forum: DBTC Forum
Topic: Replacing DB885 Axle Housing Seals
Replies: 8
Views: 669

Re: Replacing DB885 Axle Housing Seals

Diff lock is engaged and locked. A 6m X 1 bolt seemed close, local fastener supply house has BSF so will grab a couple of 1/4- BSF of a suitable length and make a "puller". I must say, the brake shoes DB supplied on these tractors were intended for the long haul... cast iron instead of a steel stamp...
by ScottUSA
Sun Jan 13, 2019 4:41 pm
Forum: DBTC Forum
Topic: Replacing DB885 Axle Housing Seals
Replies: 8
Views: 669

Replacing DB885 Axle Housing Seals

Reduction units are off. The brake shoes on one side are thoroughly soaked with what appears to be rear axle oil, no doubt the oil is the reason the brakes don't work on that side. There are two seals per side visible in the axle housings ends, how are they accessed? There are two small holes in wha...
by ScottUSA
Fri Nov 30, 2018 6:38 pm
Forum: DBTC Forum
Topic: 885 loader hydraulics problem
Replies: 4
Views: 570

Re: 885 loader hydraulics problem

Thanks! I'll contact to manufacturer of the valve.
by ScottUSA
Thu Nov 29, 2018 6:35 pm
Forum: DBTC Forum
Topic: 885 loader hydraulics problem
Replies: 4
Views: 570

Re: 885 loader hydraulics problem

Certainly this isn't that challenging a problem for you long term David Brown owners to offer a suggestion? Just kidding, I've not come up with a thing... it won't stay not working long enough to attempt to identify the problem. Reviewing flow schematics of the hydraulic system hasn't led to any con...
by ScottUSA
Wed Nov 28, 2018 1:41 pm
Forum: DBTC Forum
Topic: DB885 Starting Difficulties
Replies: 50
Views: 3622

Re: DB885 Starting Difficulties

I understand what everyone is saying about bad connections, bad wiring, worn brushes and so forth, but, if any of this was the cause, wouldn't it still occur even if the battery charger is hooked up? The tractor hasn't missed a lick while starting since I've been keeping it on the charger. It's 18 ...
by ScottUSA
Tue Nov 27, 2018 9:56 pm
Forum: DBTC Forum
Topic: DB885 Starting Difficulties
Replies: 50
Views: 3622

Re: DB885 Starting Difficulties

I'll admit to not having read all the posts to this topic so disregard if it makes no sense. Given your tractor is what, 40 years old? There is every possibility some dim bulb has been playing mechanic on it. Have you looked behind the dash? My heart stopped when I pulled my 885's tank and dash... T...
by ScottUSA
Mon Nov 26, 2018 6:26 pm
Forum: DBTC Forum
Topic: 885 loader hydraulics problem
Replies: 4
Views: 570

885 loader hydraulics problem

Dunham-Lehr 22 loader on an 885. Loader has what I believe is called an "open center spool valve" for the loader control. The camel hump has been replaced with a steel plate with two ports (hoses). If the loader is removed from the tractor the hoses must be connected at the tractor to keep from dead...
by ScottUSA
Thu Nov 08, 2018 6:32 pm
Forum: DBTC Forum
Topic: I'm Sure Someone Can...
Replies: 23
Views: 2311

Re: I'm Sure Someone Can...

Poppy, with the loader I have the power steering parts go right back where they were, only on the outside of the loader frame. Longer bolts are required, or they should be used. The dink who put mine on (a long time ago) used the originals but a tap and correct length bolts set things right. This go...
by ScottUSA
Thu Nov 08, 2018 6:14 pm
Forum: DBTC Forum
Topic: Front tyres for loader
Replies: 50
Views: 4294

Re: Front tyres for loader

Ollek, regarding the use of a counterweight on the 3-point; Is there a safe amount of counter balance that can be left hanging on the raised position lock while using a loader? Or is it better to not lock it at all while working the tractor (with a loader)? As an aside... a while back I asked about ...
by ScottUSA
Mon Nov 05, 2018 7:29 pm
Forum: DBTC Forum
Topic: I'm Sure Someone Can...
Replies: 23
Views: 2311

Re: I'm Sure Someone Can...

Poppy, I know of a fellow in Oregon with two or three D-L 22 loaders. Long way away I know but you can never tell what kind of connections a fellow has. Example; I needed good, used tracks for a older D4D Cat, found pair in Oregon (no relation). Less than a week later I stopped to ask a neighboring ...
by ScottUSA
Fri Nov 02, 2018 5:34 pm
Forum: DBTC Forum
Topic: AD3/55 in an 885 correct assembly of oil filter
Replies: 26
Views: 2830

Re: AD3/55 in an 885 correct assembly of oil filter

Dunham-Lehr 22. It is the model with only one cylinder operating the dump/roll-back function. Only drawback with the single cylinder is the attachment point on the scoop gets a workout.