Search found 92 matches

by 1952CROPMASTER
Sat Sep 07, 2019 7:33 pm
Forum: DBTC Forum
Topic: Leaking steering column DB 1210
Replies: 7
Views: 193

Re: Leaking steering column DB 1210

Hi gwatts; your local CASE/IH Dealer should have the Tool required to install this Seal, I would check with them first,
as Alan3 said It only takes approx 1.5Hr to complete the job,
by 1952CROPMASTER
Sat Sep 07, 2019 7:20 pm
Forum: DBTC Forum
Topic: Case/David Brown 990 selectamatic mystery part
Replies: 11
Views: 340

Re: Case/David Brown 990 selectamatic mystery part

Where the Valve Chest (Control Valve) is bolted to the ramshaft bracket there is two dowels, one bolt & two Nuts used, to secure the Valve Chest to the ramshaft bracket, I'm guessing that may be one of these dowels,
by 1952CROPMASTER
Thu Aug 29, 2019 1:41 am
Forum: DBTC Forum
Topic: By-pass valve removal tip
Replies: 16
Views: 1222

Re: By-pass valve removal tip

What's wrong with removing the brass plug from inside the By-Pass-Valve then screw a 3/8 UNC bolt into the Valve & with a good flat washer & a 3/8 UNC Nut make yourself a simple puller, it works for me everytime,
by 1952CROPMASTER
Wed Jul 31, 2019 1:08 pm
Forum: DBTC Forum
Topic: 885 Loader Operation with Going-Away Valve
Replies: 4
Views: 339

Re: 885 Loader Operation with Going-Away Valve

For now just add a extra Gal or two of Hyd fluid to the Transmission/Hydraulics, this will solve your problem until you have the time to fix it
by 1952CROPMASTER
Sun Jul 28, 2019 1:28 am
Forum: DBTC Forum
Topic: 990 hydraulic issue
Replies: 10
Views: 742

Re: 990 hydraulic issue

Hi Toby;
What part of Canada are you in,
by 1952CROPMASTER
Tue Jul 16, 2019 9:36 pm
Forum: DBTC Forum
Topic: Ken Jarvis tractor parts.
Replies: 2
Views: 374

Re: Ken Jarvis tractor parts.

I have one complete unit in excellent condition but the freight might be a little high
by 1952CROPMASTER
Fri Jun 21, 2019 7:45 pm
Forum: DBTC Forum
Topic: 990 trouble with 3 point
Replies: 10
Views: 796

Re: 990 trouble with 3 point

Hi Toby;
What part off Canada are you from?
by 1952CROPMASTER
Thu May 30, 2019 8:58 pm
Forum: DBTC Forum
Topic: DB885 Engine Oil Filter
Replies: 2
Views: 378

Re: DB885 Engine Oil Filter

Hi Ollek;
Thank you very much appreciated.
by 1952CROPMASTER
Wed May 29, 2019 12:54 pm
Forum: DBTC Forum
Topic: DB885 Engine Oil Filter
Replies: 2
Views: 378

DB885 Engine Oil Filter

I'm restoring a 1979 885 Serial # 11018386 with the Spin on engine oil filter, where would i find this Filter part #
Thank you
by 1952CROPMASTER
Thu May 16, 2019 1:28 pm
Forum: DBTC Forum
Topic: Oliver 500 & Oliver 600
Replies: 3
Views: 467

Re: Oliver 500 & Oliver 600

Hi Gregory;
Could you please send me a PM with your personal e-mail address, i may have a Home for your Oliver 500 & 600Tractors
Thank you.
by 1952CROPMASTER
Fri Apr 12, 2019 1:37 am
Forum: DBTC Forum
Topic: 885 mystery part
Replies: 16
Views: 1568

Re: 885 mystery part

Thanks 1952cropmaster , right that makes sense it’s a guide for the plunger not a seat, i won’t loctite it in place. The thing that looks like a zip pull (handle) is bigger than a zip pull, as I say closest thing I can think of is a lever for a cabinet lock , like a filing cabinet or a tool chest w...
by 1952CROPMASTER
Wed Apr 10, 2019 10:14 pm
Forum: DBTC Forum
Topic: 885 mystery part
Replies: 16
Views: 1568

Re: 885 mystery part

I would have to agree with mikeadams it look like a part off a Zipper, It's not part of a David Brown for sure, When you removed the Non-Return-Valve you said that the seat came out with the Plunger & that it was slightly damaged but slides freely on the plunger, if it slides freely on the Plunger, ...
by 1952CROPMASTER
Wed Feb 20, 2019 2:52 pm
Forum: DBTC Forum
Topic: 885 Loader Removal
Replies: 24
Views: 2354

Re: 885 Loader Removal

Send me a PM with your email address i may be able to help you
by 1952CROPMASTER
Wed Feb 20, 2019 1:24 pm
Forum: DBTC Forum
Topic: 885 Loader Removal
Replies: 24
Views: 2354

Re: 885 Loader Removal

The lift Cylinders (Rams) are on the correct way, check the operators manual
by 1952CROPMASTER
Fri Feb 08, 2019 4:00 pm
Forum: DBTC Forum
Topic: AL2 Loader Cylinder
Replies: 2
Views: 537

Re: AL2 Loader Cylinder

Hi Staride;
Thanks for the info, will send them a email