Search found 7 matches
Search found 7 matches • Page 1 of 1
Sounds like a lot of work if that’s the case, ( I assume it involves splitting tractor etc) for the moment now I’ve got high range which will cover most of my work ,it can stay there. Maybe it’s a job for retirement whenever that’ll be. Thanks jim
The problem still persists with high range, even with the right stick in neutral, when you raise the clutch pedal you can feel the engine revs fall and the tractor won’t move. What I have found is that if I change from low to high while the tractor is rolling forward all works ok. Any thoughts? Jim
Thanks for the advice, i used to be glued to the seat of one of these as a teenager, but I never did a great deal of taking them apart, so all advice is great fully received.
Hi DB780, photo attached. I assume the wire over the top of the selectors is the spring you refer to. The stick was in neutral when I took it off, do you think the selectors look in the correct position? Thanks in anticipation.
Thanks ,i’m Not Sure I understand what you mean, but i’ll Take the stick off and have a peer in, maybe take a photo and post it to see if you think selectors are in the wrong position
The previous owner had the gearsticks off and I don’t know what he had been up to, but when I got it I could only get HIGH and LOW on left stick. I’ve tigthened the fixings for the sticks and adjusted the clutch pedal height and it may be coinsidence but now I can get LS L HS and H ratios. The probl...
- Mon Jan 02, 2017 5:49 pm
- Forum: DBTC Forum
- Topic: 885 vineyard s/n885N/646167
- Replies: 0
- Views: 1303
currently trying to buy the above, I think its a 1972, if someone could confirm. Clutch pedal working right at top, can this be adjusted or does it require new?. thanks in anticipation.