Search found 70 matches

by wyrmat1
Sun Jan 07, 2018 10:36 am
Forum: DBTC Forum
Topic: sticky hydraulics
Replies: 1
Views: 585

sticky hydraulics

do david browns suffer from sticky hydraulics during sub zero weather, i have a 1210 and 1490 and both hydraulics will not operate when its cold
by wyrmat1
Sun Aug 06, 2017 12:46 pm
Forum: DBTC Forum
Topic: 1210 handbrake
Replies: 2
Views: 718

Re: 1210 handbrake

feel a bit daft now but found a youtube video showing taking apart and reassembly, , the pawl was sized down the hole on the opposite side and i could not see it, anyway sorted now and thanks for the reply
by wyrmat1
Fri Aug 04, 2017 8:57 am
Forum: DBTC Forum
Topic: 1210 handbrake
Replies: 2
Views: 718

1210 handbrake

can anyone tell me how the pawl and spring stay in the handbrake housing, the parts diagram does not show this
by wyrmat1
Tue Dec 20, 2016 4:40 pm
Forum: DBTC Forum
Topic: 1490 tachometer
Replies: 2
Views: 1062

1490 tachometer

my tach has started to misbehave , it swings quite a lot and also shows a lot more revs than is being used, any ideas
by wyrmat1
Sun Sep 18, 2016 11:21 am
Forum: DBTC Forum
Topic: hydraulics
Replies: 1
Views: 772

hydraulics

I am having a bit if trouble with my 1210 hydraulics, they are lifting ok but cannot get them to hold in a mid position, what is the first bit to look at and also is there any drawings of the arrangement on the 1210 as i cannot see where the selectamatic control valve is on the the tractor back end
by wyrmat1
Mon Sep 12, 2016 8:09 am
Forum: DBTC Forum
Topic: tacho on 1490
Replies: 1
Views: 767

tacho on 1490

my tacho has just started going a bit haywire, when on tickover it is showing about 2000revs but fluctuating about 200 either way, when shut off its not at zero, can they be replaced or is it a new one as it seems built into the console
by wyrmat1
Thu Jul 14, 2016 7:39 am
Forum: DBTC Forum
Topic: Carrero Front Axle Hubs
Replies: 4
Views: 1786

RE: Carrero Front Axle Hubs

no they don't but Lith-Moly is the grease designed for gears
by wyrmat1
Wed Jul 13, 2016 3:09 pm
Forum: DBTC Forum
Topic: Carrero Front Axle Hubs
Replies: 4
Views: 1786

Carrero Front Axle Hubs

I have been using lithium molybdenum grease on my land rover front hubs for some time instead of oil, any one have an idea if this would be suitable for Carrero axle lubrication of the hubs, to save the usual oil leaks from the hubs
by wyrmat1
Fri Jun 03, 2016 11:25 am
Forum: DBTC Forum
Topic: fuel sender for 1210
Replies: 1
Views: 1045

fuel sender for 1210

any idea who would have a sender unit for a 1210, my fuel tank is in front of the dash and the sender is on the front vertical side of the tank, all the normal suppliers only stock the type for the 1210 with platform and underslung tanks which have the sender unit on the top of the tank
by wyrmat1
Wed Jun 01, 2016 11:31 am
Forum: DBTC Forum
Topic: 1210 manual steering box oil top up
Replies: 2
Views: 1212

RE: 1210 manual steering box oil top up

found it, i was looking for a hex head plug, thanks
by wyrmat1
Wed Jun 01, 2016 10:13 am
Forum: DBTC Forum
Topic: 1210 manual steering box oil top up
Replies: 2
Views: 1212

1210 manual steering box oil top up

for the life of me i cannot find the filler plug to top oil up as i have had the steering box off the tractor, any ideas, my op manual is very good at telling me how to drain the oil but not to top up
by wyrmat1
Fri May 13, 2016 8:58 am
Forum: DBTC Forum
Topic: Splitting my 1210
Replies: 11
Views: 3736

do i have to use special back plate and bolts ( as specified in the case maintenance manual) to split clutch to get at transmission plate
by wyrmat1
Tue May 10, 2016 10:57 am
Forum: DBTC Forum
Topic: Splitting my 1210
Replies: 11
Views: 3736

I was splitting to fit some new bearings for the thrust carrier, PTO plate is fine but i was hoping to check the transmission one for thickness without further dismantling
by wyrmat1
Mon May 09, 2016 11:50 pm
Forum: DBTC Forum
Topic: Splitting my 1210
Replies: 11
Views: 3736

sorted now i think i was being a little timid, is there any way of checking the clutch transmission plate condition without breaking down the full clutch unit
by wyrmat1
Sun May 08, 2016 4:06 pm
Forum: DBTC Forum
Topic: Splitting my 1210
Replies: 11
Views: 3736

RE: Splitting my 1210

done all that, is there any locating dowels etc that may be holding it together, it does not want to come apart