Search found 669 matches

by bonserdb
Mon Jan 20, 2014 8:41 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

new pump spec.

Tandem, Left Rotation, Flow Rate 19/14cm3
by bonserdb
Mon Jan 20, 2014 8:30 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

another thought, the rataining plug that hold the bypass and hold valve, i see theres 2 different part numbers... any reason? both look identical
by bonserdb
Mon Jan 20, 2014 8:27 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

she has had a new pump..... that small orifice washer looks to have a bigger hole than one in a 880... isit meant to be?
by bonserdb
Mon Jan 20, 2014 5:49 pm
Forum: DBTC Forum
Topic: hydrashift hydraulic oil filters
Replies: 6
Views: 4518

RE: hydrashift hydraulic oil filters

main one under belly on a belly casting. That plug is also your hydrashift suction filter. You clean it in petrol. You should also remove the belly casting it screws into as the main hydraulic suction filter lives in there. And there's a drain plug at the back under the diff. Only filter you change ...
by bonserdb
Mon Jan 20, 2014 5:46 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

Its working some shape again. The latching valve had stuck. Removed this and the 2 top valves. And left engine run to flush. Cleaned the valves again. And its responding to lever. Im looking at the disc with a hole in it. Compared to one from a 880 the home is huge?
by bonserdb
Mon Jan 20, 2014 5:04 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

All it will do now is lift regardless of where lever is
by bonserdb
Mon Jan 20, 2014 4:02 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

What do you mean ollek?
by bonserdb
Mon Jan 20, 2014 4:01 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

Took a disk from a 1490. Hole looks alot smaller all it will do now it lift
by bonserdb
Mon Jan 20, 2014 3:06 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

hole is bigger than 0.8. I can see light around 0.8 mm welding wire. Can I use the insides of the valve from another unit?
by bonserdb
Mon Jan 20, 2014 2:18 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

RE: 1594 hydraulic issues

Yes plate was there. No nylon screen though. Hole should be 0.8?
by bonserdb
Mon Jan 20, 2014 1:29 pm
Forum: DBTC Forum
Topic: 1594 hydraulic issues
Replies: 17
Views: 8781

1594 hydraulic issues

Hi My 1594 has a hydraulic lift problem. With the lift lever down and the arms down if you rev the engine they'll lift. Let the revs off they'll go back down. I've cleaned the 2 valves in the top. And took out the latching valve. I also checked the latching valve sleeve and that lines up with the ho...
by bonserdb
Tue Jan 14, 2014 12:53 pm
Forum: DBTC Forum
Topic: 1410/12 hydraulic cross shaft fit a 1594
Replies: 3
Views: 2248

RE: 1410/12 hydraulic cross shaft fit a 1594

Only difference I know is the end inside the control box. I think a 1410 still has a cam in there. 1594 has pins onto levers
by bonserdb
Mon Jan 13, 2014 4:43 pm
Forum: DBTC Forum
Topic: 1410/12 hydraulic cross shaft fit a 1594
Replies: 3
Views: 2248

1410/12 hydraulic cross shaft fit a 1594

Hi guys

As the post says.. Will it fit?

Matt
by bonserdb
Fri Jan 10, 2014 9:47 am
Forum: DBTC Forum
Topic: 1594 hydra, need some advice on a hydra problem
Replies: 9
Views: 5831

Talking of sequence valve. Would one from a 1490 work?
by bonserdb
Fri Jan 10, 2014 9:46 am
Forum: DBTC Forum
Topic: 1594 hydra, need some advice on a hydra problem
Replies: 9
Views: 5831

Would a pressure test show up a fault if it was sequence valve or band? I have no issue taking the cab off anyway. It was planned to come off as I can't stop a leak on a spool slice....