Search found 88 matches
- Tue May 06, 2014 7:47 pm
- Forum: DBTC Forum
- Topic: db990 stuck in forward second gear
- Replies: 5
- Views: 3573
could be a couple of things the spiral pin has broken in the selector were it bolts on to the top of gearbox its jumped out of the selector gate in the gear box or the syncro has come to bits in the gear box.Can you select other gears ei 1st or reverse or is the gearstick stuck if it is stuck its ju...
thank you i thought it was that plug on the right hand block as their is,nt a plug on the left hand side like 1390 ie and i know the filler plug is a no no we get alot of problems with people piping in loaders wrong on caseih,s and mccormicks and the they cook the back end
i will have a look in my dads barn i think their is one their it came off our s reg 990 when it was new my dad said it was a pain in the you no what when you weren't using DB attachments
by the state of the oil round the hub i would be taking the nut off and fitting a new set of bearings and seal and give the planet gears a good wash out to i bet the bearings are braking up and in the past i have had to split the nut in half to get them off my be worth checking the king pins and fit...
where the grab handles are in the cab in front of the dash is a hole if you lift the dash up and pull back the rubber in between the handles or the storage tray where we keep all the junk you will see the tank sender i have just checked on a 1210 and its in the same place as a 990 qcab narrow door