Search found 26 matches

by mulholland
Mon Dec 05, 2016 1:09 pm
Forum: DBTC Forum
Topic: 1594
Replies: 4
Views: 1255

RE: 1594

There was no thermostart unit fitted at all. The injector return line was flowing like a water tap into the manifold. A lot of diesel
by mulholland
Sun Dec 04, 2016 10:34 pm
Forum: DBTC Forum
Topic: 1594
Replies: 4
Views: 1255

1594

Hello everyone, a quick question regarding my 1594. Got a replacement engine fitted off a 1694 and at the garage where the engine was fitted they left off the thermostart fuel reservoir and all connections. They plumbed the return injector line straight into the heater plugs, so no fuel going back t...
by mulholland
Tue Oct 25, 2011 9:53 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

well we took most of the hoses off the front pump because we had to take the front pump out to get the coupling off.
by mulholland
Tue Oct 25, 2011 9:32 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

put all back together today and the O ring did slip out, but got it back in with no damage to splines, good idea about using some tape, must do that tomorrow. Problem now is no lift arms or spools, does the back pump pump oil to the front pump? whats the set up? any suggestions to test the pumps wou...
by mulholland
Mon Oct 24, 2011 10:12 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

ah sure I think the the memory is being affected by all the stress of feeding cattle lovely expensive bales of hay while the bales of silage are out in the field gathering dust.
by mulholland
Mon Oct 24, 2011 8:07 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

thanks Powerrabbit, got everything off today, tricky enough, had to take the pump out all together to get the pump pulley off, took of the bottom hose off the radiator and got it out, the pump pulley put up a good fight, you mentioned a thick rubber disk on both ends and an O ring on each end, There...
by mulholland
Sun Oct 23, 2011 11:34 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

thanks a lot for that info, will give it a go tomorrow.
by mulholland
Sun Oct 23, 2011 9:11 pm
Forum: DBTC Forum
Topic: 1594 HELP FRONT SHAFT
Replies: 14
Views: 6186

1594 HELP FRONT SHAFT

Hello all, had a look today and the splines on the front shaft are chewed on the pump end, there was a rubber seal in the middle of the shaft and I could move the shaft forward and back exposing the teeth, I hope I can get a few questions answered, If I take off the 4 bolts on the pulley will there ...
by mulholland
Fri Oct 21, 2011 11:14 pm
Forum: DBTC Forum
Topic: 1594 HELP
Replies: 2
Views: 1691

thanks for the reply, we'll have a look sunday and take it from there, we're good men on the hand shovel here but are not too handy when it comes to 1594 repairs
by mulholland
Fri Oct 21, 2011 10:33 pm
Forum: DBTC Forum
Topic: 1594 HELP
Replies: 2
Views: 1691

1594 HELP

hello everyone, im in a spot of bother, was fitting a back loader this evening and one of the ram's has 2 hydraulic hoses on it, i connected them both to the spools controlled by cab lever 1. Then connected another hose from another ram to a spool controlled by cab lever 2. This ram worked fine but ...
by mulholland
Sun Jul 10, 2011 4:17 pm
Forum: DBTC Forum
Topic: 1594 switch
Replies: 5
Views: 2790

thanks for that, sure maybe I'll get him to concentrate on the fuel and temperature gauges and leave the fancy stuff alone
by mulholland
Sun Jul 10, 2011 3:17 pm
Forum: DBTC Forum
Topic: 1594 switch
Replies: 5
Views: 2790

1594 switch

hello all, im gonna get someone to fix a few electrical problems on our 1594, was wondering could anyone tell me what a switch on the dash board is for. Its on the left hand side of the dash board, its a black circular knob that has 3 turns on it.If you look at the post below, its half hidden by the...
by mulholland
Mon May 23, 2011 6:43 pm
Forum: DBTC Forum
Topic: 1594 commemorative edition front badge
Replies: 12
Views: 6347

I know it ended on £142, someone very cheeky bet me to it with 5 seconds to go, I had the highest bid all day, first time bidding on ebay, I'll know the next time to expect these things. Again If anyone has a badge for sale privately, I'd be interested.
by mulholland
Sat May 14, 2011 10:51 pm
Forum: DBTC Forum
Topic: 1594 commemorative edition front badge
Replies: 12
Views: 6347

that's not what I was hoping to hear, that's some money for a badge, I'll have to make me own out of cardboard or something.
by mulholland
Sat May 14, 2011 10:28 pm
Forum: DBTC Forum
Topic: 1594 commemorative edition front badge
Replies: 12
Views: 6347

1594 commemorative edition front badge

hello everyone, does anyone know where I could buy a proper square shaped front badge for our 1988 1594 commemorative edition, been looking on a lot of websites but having no joy. thanks.